홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

7-(4-chlorophenyl)-2-((2-methoxy-6-(trifluoromethyl)pyridin-3-yl)methyl)-8-(pyridin-4-yl)-[1,2,4]triazolo[4,3-a]pyridin-3(2H)-one → HCID 178517477, 화합물

HRID 2101326
인쇄

반응식

HRID 2101326 반응식
[Cl:1][C:2]1[CH:7]=[CH:6][C:5]([C:8]2[CH:13]=[CH:12][N:11]3[C:14](=[O:30])[N:15]([CH2:17][C:18]4[C:19]([O:28]C)=[N:20][C:21]([C:24]([F:27])([F:26])[F:25])=[CH:22][CH:23]=4)[N:16]=[C:10]3[C:9]=2[C:31]2[CH:36]=[CH:35][N:34]=[CH:33][CH:32]=2)=[CH:4][CH:3]=1>Br>[Cl:1][C:2]1[CH:3]=[CH:4][C:5]([C:8]2[CH:13]=[CH:12][N:11]3[C:14](=[O:30])[N:15]([CH2:17][C:18]4[C:19]([OH:28])=[N:20][C:21]([C:24]([F:26])([F:27])[F:25])=[CH:22][CH:23]=4)[N:16]=[C:10]3[C:9]=2[C:31]2[CH:32]=[CH:33][N:34]=[CH:35][CH:36]=2)=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 160048077-(4-chlorophenyl)-2-((2-methoxy-6-(trifluoromethyl)pyridin-3-yl)methyl)-8-(pyridin-4-yl)-[1,2,4]triazolo[4,3-a]pyridin-3(2H)-one

생성물 1

HCID 178517477HCID 178517477, 화합물

시약·촉매·용매 1

HCID 260Hydrogen Bromide용매

반응 조건

온도
85 °C

실험 절차

To aqueous HBr solution (48%, 10 mL) was added 7-(4-chlorophenyl)-2-((2-methoxy-6-(trifluoromethyl)pyridin-3-yl)methyl)-8-(pyridin-4-yl)-[1,2,4]triazolo[4,3-a]pyridin-3(2H)-one (210 mg, 0.41 mmol). The resulting solution was stirred at 85° C. for 4 h. After cooling to room temperature, the reaction mixture was concentrated under reduced pressure to remove most of the solvent. The remaining liquid was stirred at 0° C., and neutralized to pH 7-8 by careful addition of 1.0 N aqueous NaOH. Yellow precipitate formed, and this was collected by filtration, washed with water (20 mL×2), and dried in a vacuum oven at 45° C. for 16 h to afford 200 mg (93% pure) of the title compound as a yellow solid. The product was purified by preparative reverse phase HPLC (Phenomenex Luna 5 μm C-18 21.2×100 mm column eluted with a linear gradient of 50% to 90% B over 18 min (A=0.1% trifluoroacetic acid, 90% water, 10% methanol and B=0.1% trifluoroacetic acid, 90% methanol, 10% water) with flow rate at 20 mL/min and UV detection at 220 nm). The desired fractions were concentrated under reduced pressure. The residue was dissolved in EtOAc, washed with saturated aqueous NaHCO3 once, water twice, then saturated aqueous NaCl, dried over Na2SO4 and evaporated. The product was dissolved in acetonitrile, frozen and lyophilized to afford 150 mg (74%) of the title compound as a light yellow powder. HPLC/MS: retention time=2.50 min, [M+H]+=498.2.

후처리

  1. temperatureAfter cooling to room temperature
  2. concentrationthe reaction mixture was concentrated under reduced pressure
  3. customto remove most of the solvent
  4. stirringThe remaining liquid was stirred at 0° C.
  5. additionneutralized to pH 7-8 by careful addition of 1.0 N aqueous NaOH
  6. customYellow precipitate formed
  7. filtrationthis was collected by filtration
  8. washwashed with water (20 mL×2)
  9. customdried in a vacuum oven at 45° C. for 16 h

출처 및 근거

ORD 기록
ord-850b409687754b978315843eb9449951
출처 데이터셋
uspto-grants-2009_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07572808B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트