Acetic Acid → 4-{[(2,4-Dichloro-thiazol-5-yl)methyl]-isobutyl-amino}-piperidine-1-carboxylic acid t-butyl ester

HRID 2111915노트

반응식

HRID 2111915 반응식
[C:1]([O:5][C:6]([N:8]1[CH2:13][CH2:12][CH:11]([NH:14][CH2:15][C:16]2[S:20][C:19]([Cl:21])=[N:18][C:17]=2[Cl:22])[CH2:10][CH2:9]1)=[O:7])([CH3:4])([CH3:3])[CH3:2].C(O)(=O)C.[CH:27](=O)[CH:28]([CH3:30])[CH3:29].C(O[BH-](OC(=O)C)OC(=O)C)(=O)C.[Na+].ClC1SC(CO)=C(Cl)N=1>CC(OC)(C)C>[C:1]([O:5][C:6]([N:8]1[CH2:13][CH2:12][CH:11]([N:14]([CH2:15][C:16]2[S:20][C:19]([Cl:21])=[N:18][C:17]=2[Cl:22])[CH2:27][CH:28]([CH3:30])[CH3:29])[CH2:10][CH2:9]1)=[O:7])([CH3:4])([CH3:2])[CH3:3]

참가 물질

7

반응물 5

HCID 176Acetic AcidHCID 6561IsobutyraldehydeHCID 5049666Sodium triacetoxyborohydrideHCID 10375112(Dichloro-1,3-thiazol-5-yl)methanolHCID 685747814-{[(2,4-Dichloro-thiazol-5-yl)methyl]-amino}-piperidine-1-carboxylic acid t-butyl ester

생성물 1

HCID 685764924-{[(2,4-Dichloro-thiazol-5-yl)methyl]-isobutyl-amino}-piperidine-1-carboxylic acid t-butyl ester수율 78%

시약·촉매·용매 1

HCID 15413tert-Butyl methyl ether용매2회

반응 조건

온도
25 °C

실험 절차

To a solution of 4-{[(2,4-dichloro-thiazol-5-yl)methyl]-amino}-piperidine-1-carboxylic acid t-butyl ester (330 g, 0.9 mol, 1 equiv. mol) in 3.5 L MTBE is added acetic acid (57.2 g, 0.95 mol, 1.06 equiv. mol), isobutyraldehyde (97.3 g, 1.35 mol, 1.5 equiv. mol) and sodium triacetoxy borohydride (305 g, 1.44 mol, 1.6 equiv. mol) suspension in 0.5 L of MTBE. A slight exotherm takes place temperature increases from 24 to 26° C. After 5 h at room temperature the reaction mixture is quenched with 1.3 L water and 30% sodium hydroxide (500 ml). The yellow organic upper phase is washed with 2 L water, then with 2 L of brine. The organic layer is then concentrated under vacuum. The crude product is isolated as yellow powder, 395 g (HPLC 92% area), contaminated by ˜7% of (2,4-dichloro-thiazol-5-yl)-methanol. Purification is done by dissolution of the crude in 900 ml isopropanol/water 8/2 v/v, stirring at 80° C. until complete dissolution, then cool down to room temperature. Filtered at 0° C., the solid is washed with 150 ml of cold isopropanol. The cake is then dried under vacuum at 50° C., to afford 4-{[(2,4-dichloro-thiazol-5-yl)methyl]-isobutyl-amino}-piperidine-1-carboxylic acid t-butyl ester as a white crystalline powder, 293 g (78% yield for the two first steps). Mass spectrum (ion spray): m/z=422 (M+1); 1H NMR (250 MHz, CDCl3): δ=4.35 (2H, brd), 3.87 (2H, s), 2.80 (3H, m), 2.42 (2H,d), 1.86 (3H, m), 1.61 (11H, m), 1.06 (6H, d); 13C NMR (62 MHz, CDCl3): δ=155.02, 150.71, 137.29, 132.52, 79.95, 58.81, 58.44, 47.64, 43.93, 28.82, 28.03, 27.48, 21.03.

후처리

  1. customAfter 5 h at room temperature the reaction mixture is quenched with 1.3 L water and 30% sodium hydroxide (500 ml)
  2. washThe yellow organic upper phase is washed with 2 L water
  3. concentrationThe organic layer is then concentrated under vacuum
  4. customThe crude product is isolated as yellow powder, 395 g (HPLC 92% area)
  5. customPurification
  6. dissolutionis done by dissolution of the crude in 900 ml isopropanol/water 8/2 v/v
  7. temperaturecool down to room temperature
  8. filtrationFiltered at 0° C.
  9. washthe solid is washed with 150 ml of cold isopropanol
  10. customThe cake is then dried under vacuum at 50° C.

출처 및 근거

ORD 기록
ord-552303e3faad497a9bf2628cc4e9e421
출처 데이터셋
uspto-grants-2009_04
특허 번호
US07521462B2

반응 노트

불러오는 중…