홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Chloroacetone → Phenylsulfonylacetone

HRID 2165787
인쇄

반응식

HRID 2165787 반응식
[C:1]1([S:7]([O-:9])=[O:8])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[Na+].O1CCOCC1.Cl[CH2:18][C:19](=[O:21])[CH3:20]>O>[C:1]1([S:7]([CH2:18][C:19](=[O:21])[CH3:20])(=[O:9])=[O:8])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6571ChloroacetoneHCID 312751,4-DioxaneHCID 2723840Benzenesulfinic acid, sodium salt

생성물 1

HCID 735827Phenylsulfonylacetone수율 60.3%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
50 °C

실험 절차

Sodium benzenesulfinate (50 g, 304.6 mmol) was dissolved in water (200 ml). A dioxane solution (200 ml) of chloroacetone (29.6 g, 319.9 mmol) was added and the solution was stirred and heated to 50° C. for 22 hours then cooled to approximately 25° C. The solution was extracted with methylene chloride (2X, 250 ml), the methylene chloride layers were combined and washed with saturated aqueous sodium bicarbonate solution (1X, 250 ml) and water (1X, 250 ml) then the aqueous wash solutions were combined and extracted with methylene chloride (2X, 100 ml). All of the methylene chloride layers were combined and washed with saturated aqueous sodium chloride solution (1X, 150 ml), dried over sodium sulfate, filtered and concentrated in vacuo to a solid. The solid was dissolved in diethyl ether (800 ml) with gentle heating and then the solution was stirred and allowed to cool to room temperature. The solution was slowly cooled to 0° C. with stirring, causing the product to crystallize. The resulting crystals were collected by filtration, washed with cold diethyl ether, and dried in vacuo at 35° C. for 4 hours to yield 36.43 g of (phenylsulfonyl)acetone. The filtrate was concentrated to approximately one-eighth of its volume in vacuo and was gradually cooled below room temperature to induce crystallization, then stirred overnight at room temperature. The resulting crystals were collected by filtration, washed with cold diethyl ether, and dried in vacuo at 35° C. for 8 hours to yield an additional 14 g of the (phenylsulfonyl)acetone: n.m.r. (90 MHz, CDCl3): δ 2.39 (s, 3), 4.17 (s, 2), 7.55-7.95 (m, 5); m.p. 56°-58° C.

후처리

  1. temperaturethen cooled to approximately 25° C
  2. extractionThe solution was extracted with methylene chloride (2X, 250 ml)
  3. washwashed with saturated aqueous sodium bicarbonate solution (1X, 250 ml) and water (1X, 250 ml)
  4. extractionextracted with methylene chloride (2X, 100 ml)
  5. washwashed with saturated aqueous sodium chloride solution (1X, 150 ml)
  6. dry with materialdried over sodium sulfate
  7. filtrationfiltered
  8. concentrationconcentrated in vacuo to a solid
  9. dissolutionThe solid was dissolved in diethyl ether (800 ml)
  10. temperaturewith gentle heating
  11. stirringthe solution was stirred
  12. temperatureto cool to room temperature
  13. temperatureThe solution was slowly cooled to 0° C.
  14. stirringwith stirring
  15. customto crystallize
  16. filtrationThe resulting crystals were collected by filtration
  17. washwashed with cold diethyl ether
  18. customdried in vacuo at 35° C. for 4 hours

출처 및 근거

ORD 기록
ord-c02f435cad934215aa592c9e2d02eca3
출처 데이터셋
uspto-grants-1990_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04940718

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트