홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diethyl Sulfate → C3F7Ocf(CF3)CF2ocf(CF3)CF(OC2H5)C2F5

HRID 217418
인쇄

반응식

HRID 217418 반응식
[F-:1].[K+].[F:3][C:4]([F:12])([C:8]([F:11])([F:10])[F:9])[C:5]([F:7])=[O:6].[C:13]([O:23][C:24]([C:30]([O:33][C:34](=[C:36]([F:38])[F:37])[F:35])([F:32])[F:31])([C:26]([F:29])([F:28])[F:27])[F:25])([C:16]([C:19]([F:22])([F:21])[F:20])([F:18])[F:17])([F:15])[F:14].C(O[CH:42]=[CH2:43])=C.S(OCC)(OCC)(=O)=O.[OH-].[K+]>COCCOCCOC>[C:13]([O:23][C:24]([C:30]([O:33][C:34]([C:5]([C:4]([C:8]([F:11])([F:10])[F:9])([F:12])[F:3])([O:6][CH2:42][CH3:43])[F:7])([C:36]([F:1])([F:37])[F:38])[F:35])([F:32])[F:31])([C:26]([F:28])([F:27])[F:29])[F:25])([C:16]([C:19]([F:22])([F:21])[F:20])([F:18])[F:17])([F:15])[F:14]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 6

HCID 6163Diethyl SulfateHCID 8024Vinyl etherHCID 14797Potassium HydroxideHCID 67912Perfluoropropionyl fluorideHCID 1026621,1,1,2,3,3-Hexafluoro-2-(heptafluoropropoxy)-3-((trifluorovinyl)oxy)propaneHCID 522689Potassium Fluoride2회

생성물 1

HCID 87265928
C3F7Ocf(CF3)CF2ocf(CF3)CF(OC2H5)C2F5

시약·촉매·용매 1

HCID 8150Diglyme용매3회

반응 조건

온도
85 °C

실험 절차

A clean, dry, 600 mL, stainless steel, Parr pressure reactor was charged with spray-dried potassium fluoride (10.0 grams, 0.17 mole), anhydrous diglyme (129 grams), and Adogen™ 464 phase transfer catalyst (2.2 grams). The reactor was sealed, cooled with a dry ice-acetone bath, evacuated, and charged with perfluoropropionyl fluoride (70.0 grams, 0.42 mole) and C3F7OCF(CF3)CF2OCF═CF2 (170 grams, 0.39 mole). The reactor was heated to 85° C., held for 16 hours with agitation, and cooled to room temperature. The resulting intermediate ketone-containing reaction mixture (0.39 mole based on starting vinyl ether) was used without further purification and was combined with an additional amount of anhydrous diglyme (1000 grams), potassium fluoride (35.7 grams, 0.62 mole), catalyst (28 grams, 56 percent solution in diglyme), and diethyl sulfate (121.2 grams, 0.79 mole) in a 3 L flask. With stirring, the flask was heated to 52° C. for 16 hours. At the end of this time, potassium hydroxide (52 grams, dissolved in 300 g water) was added, and the resulting mixture was heated to 65° C. and then distilled azeotropically using a Dean Stark trap, from which the resulting lower fluorochemical phase was separated during the distillation. The resulting product was distilled (b.p.=189-191° C.) to a purity of 92 percent. Product structure was confirmed by IR and GCMS.

후처리

  1. customA clean, dry
  2. customThe reactor was sealed
  3. temperaturecooled with a dry ice-acetone bath
  4. customevacuated
  5. temperaturecooled to room temperature
  6. customwas used without further purification
  7. temperaturethe flask was heated to 52° C. for 16 hours
  8. temperaturethe resulting mixture was heated to 65° C.
  9. distillationdistilled azeotropically
  10. customfrom which the resulting lower fluorochemical phase was separated during the distillation
  11. distillationThe resulting product was distilled (b.p.=189-191° C.) to a purity of 92 percent

출처 및 근거

ORD 기록
ord-45d50488638b4e42a4f88161249bc4ab
출처 데이터셋
uspto-grants-2012_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08193397B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트