홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Boron trifluoride etherate → 3-(4-Bromophenyl)propan-1-ol

HRID 217783
인쇄

반응식

HRID 217783 반응식
[BH4-].[Na+].[CH2:3]1[CH2:7][O:6][CH2:5][CH2:4]1.[Br:8][C:9]1[CH:14]=[CH:13]C=[CH:11][C:10]=1CCC(O)=O.B(F)(F)F.CCOCC>CC(OC)(C)C.O>[Br:8][C:9]1[CH:14]=[CH:13][C:5]([CH2:4][CH2:3][CH2:7][OH:6])=[CH:11][CH:10]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 8000Boron trifluoride etherateHCID 8028Tetrahydrofuran2회HCID 3160103-(2-Bromophenyl)propionic acid2회HCID 4311764Sodium borohydride

생성물 1

HCID 105606143-(4-Bromophenyl)propan-1-ol

시약·촉매·용매 2

HCID 962Water용매
HCID 15413
tert-Butyl methyl ether
용매

반응 조건

온도
25 °C

실험 절차

Sodium borohydride (119.12 g) and THF (5 L) were charged into reactor 1 and temperature adjusted to −20° C. 3-(bromophenyl)propionic acid (1 kg) was charged into reactor 2 with THF (3 L) and stirred at 25° C. until all the solids dissolved. This solution in reactor 2 was transferred to reactor 1 maintaining reactor 1 contents at <0° C. BF3.Et2O (991.4 g) was slowly added into reactor 1 maintaining reactor 1 contents at −20 to −10° C. After addition, the mixture was stirred at −20 to −10° C. for 1 h. The reaction is analysed for completion (3-(bromophenyl)propionic acid <2.5%). Water (2 L) was slowly added into reactor 1 to quench the reaction. (gas evolution). MTBE (5 L) was charged into reactor 1 and phases separation was carried out. The upper layer was collected and lower layer was washed with MTBE (5 L). The upper layer was collected and combined with the layer from the previous step. Adjusted pH value of the organic layer to 8-9 by adding 1N NaOH solution. The organic layer was washed with saturated NaCl solution (2 L) and the upper layer was collected. The organic layer was evaporated down to a colourless oil.

후처리

  1. customadjusted to −20° C
  2. dissolutiondissolved
  3. customThis solution in reactor 2 was transferred to reactor
  4. customat <0° C
  5. additionAfter addition
  6. stirringthe mixture was stirred at −20 to −10° C. for 1 h
  7. customto quench
  8. customthe reaction
  9. custom1 and phases separation
  10. customThe upper layer was collected
  11. washlower layer was washed with MTBE (5 L)
  12. customThe upper layer was collected
  13. additionAdjusted pH value of the organic layer to 8-9 by adding 1N NaOH solution
  14. washThe organic layer was washed with saturated NaCl solution (2 L)
  15. customthe upper layer was collected
  16. customThe organic layer was evaporated down to a colourless oil

출처 및 근거

ORD 기록
ord-34040895c7734d0f8dcdc8093bf0d886
출처 데이터셋
uspto-grants-2012_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08198285B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트