홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Nitrogen → 12,12-Diethoxydodec-1-yne

HRID 2193991
인쇄

반응식

HRID 2193991 반응식
[C-:1]#[C-:2].[Li+].[Li+].[Na+].[I-].Cl[CH2:8][CH2:9][CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH:17]([O:21][CH2:22][CH3:23])[O:18][CH2:19][CH3:20].N#N>CS(C)=O>[CH2:19]([O:18][CH:17]([O:21][CH2:22][CH3:23])[CH2:16][CH2:15][CH2:14][CH2:13][CH2:12][CH2:11][CH2:10][CH2:9][CH2:8][C:1]#[CH:2])[CH3:20]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 947NitrogenHCID 5238Sodium IodideHCID 4685637210-Chloro-1,1-diethoxydecaneHCID 178462446HCID 178462446, 화합물

생성물 1

HCID 4619179612,12-Diethoxydodec-1-yne수율 93%

시약·촉매·용매 1

HCID 679Dimethyl Sulfoxide용매

반응 조건

온도
30 °C

실험 절차

To a dark solution of lithium acetylide, ethylenediamine complex (13.8 g, 134.90 mMol, (90%) Su: Aldrich) and NaI (0.78 g, 5.19 mMol, (99+%), Su: Acros) in DMSO (100 ml anhydrous (99.7%) Su: Acros) was charged 10-chloro-1,1-diethoxydecane 3 (27.48 g, 103.77 mMol Su: from step B) while maintaining reaction temperature around 30° C., under a blanket of N2. The addition funnel was rinsed with DMSO (15 ml, anhydrous, Su: Acros). The solution was monitored by GC for compound 3 consumption (compound 3<2.0 Area % by GC). After 4 hr stirring at 30° C., H2O (200 ml) were charged into the reaction mixture to quench the reaction. The aqueous layer was extracted with heptane (2×200 ml). The organic layer was filtered through a plug of Celite® 521 (15 g, Su: Sigma-Aldrich) one by one after phase separation. The combined filtrate was washed with a solution of H2O (100 ml) and brine (50 ml). The water in this organic solution was removed by azeotropic distillation under normal conditions by means of adding and removing heptane (repeat if necessary until KF=˜0.2%). The resultant solution was concentrated under reduced pressure (pot temperature ˜35° C.) to give 24.6 g of 12,12-diethoxydodec-1-yne 4 as an amber liquid (93% yield over steps A thru C, after C). This material was used without further purification. GC: column SP, Rt: 12.2 for 10-chloro-1,1-diethoxydecane 3, and Rt: 11.1 min for 12,12-diethoxydodec-1-yne 4 (<5 Area %). 1H NMR (CDCl3, 400 MHz): δ 4.48 (t, J=5.60, 1H), 3.6 (m, J=7.07 Hz, 2H), 3.5 (m, J=7.07 Hz, 2H), 2.18 (dt, J=7.10, 2.80 Hz, 2H), 1.94 (t, J=2.60 Hz, 1H), 1.6 (m, 2H), 1.52 (qn, J=7.2 Hz, 2H), 1.4 (m, 2H), 1.29 (br s, 10H), 1.20 (t, J=7.00 Hz, 6H).

후처리

  1. temperaturewhile maintaining
  2. customreaction temperature around 30° C.
  3. washThe addition funnel was rinsed with DMSO (15 ml, anhydrous, Su: Acros)
  4. customThe solution was monitored by GC for compound 3 consumption (compound 3<2.0 Area % by GC)
  5. additionH2O (200 ml) were charged into the reaction mixture
  6. customto quench
  7. customthe reaction
  8. extractionThe aqueous layer was extracted with heptane (2×200 ml)
  9. filtrationThe organic layer was filtered through a plug of Celite® 521 (15 g, Su: Sigma-Aldrich) one by one
  10. customafter phase separation
  11. washThe combined filtrate was washed with a solution of H2O (100 ml) and brine (50 ml)
  12. customThe water in this organic solution was removed by azeotropic distillation under normal conditions by means
  13. additionof adding
  14. customremoving heptane (repeat if necessary until KF=˜0.2%)
  15. concentrationThe resultant solution was concentrated under reduced pressure (pot temperature ˜35° C.)

출처 및 근거

ORD 기록
ord-562b2187396c4cd89da70c7b8ffafd84
출처 데이터셋
uspto-grants-2012_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08329957B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트