Acetic Acid → 3-Methyl-N-propyl-1H-indol-1-amine
반응식
[BH4-].[Na+].[CH3:3][C:4]1[C:12]2[C:7](=[CH:8][CH:9]=[CH:10][CH:11]=2)[N:6]([N:13]=[CH:14][CH2:15][CH3:16])[CH:5]=1.C(O)(=O)C.[H][H]>CN1C(=O)CCC1.O.C(O)C>[CH3:3][C:4]1[C:12]2[C:7](=[CH:8][CH:9]=[CH:10][CH:11]=2)[N:6]([NH:13][CH2:14][CH2:15][CH3:16])[CH:5]=1참가 물질
반응 조건
- 온도
- 30 °C
실험 절차
In a 800 L vessel, prepare a solution of 3.0 kg (74.4 mol) sodium borohydride and 26.8 kg (124 mol, 86% purity) 3-methyl-N-(propylidene)-1H-indol-1-amine in 108 kg NMP. Prepare a solution of 4.5 kg (74.4 mol) glacial acetic acid in 27 kg NMP. Add the acetic acid solution over a period of about 30 nm at 30° C. to the sodium borohydride solution. Immediately hydrogen is evolved. Stir the reaction mixture at 30° C. until completion of the reaction (˜1 h). Add 6.3 kg ethanol to the reaction mixture, foaming occurs immediately. The reaction mixture is then worked-up by adding additional 80 L water cautiously. Attention is taken during the addition of water such that foaming is controlled, slow addition of water is recommended especially in the beginning to avoid uncontrolled foaming. Care is taken to ensure no or only minimal foaming occurs while the first 1–2 L of water is added. The reaction mixture is allowed to stand over night. Extract the water phase three times with 45 kg n-heptane and wash the combined organic phases with 66 L water. Evaporate the combined organic phases to dryness. This results in 22.4 kg 3-methyl-N-propyl-1H-indol-1-amine (yield 90%, 94% purity) as a brown liquid.
후처리
- customuntil completion of the reaction (˜1 h)
- additionis added
- waitto stand over night
- extractionExtract the water phase three times with 45 kg n-heptane
- washwash the combined organic phases with 66 L water
- customEvaporate the combined organic phases to dryness
출처 및 근거
- ORD 기록
- ord-cfa297d152bc4aef9f8cb3d3b4cedcd4
- 출처 데이터셋
- uspto-grants-2006_09
- 특허 번호
- US07112682B2
반응 노트
불러오는 중…