홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Ethanethiol → ethyl 2-[(1S)-5-hydroxy-2,3-dihydro-1H-inden-1-yl]acetate

HRID 2235837
노트
인쇄 미리보기

반응식

HRID 2235837 반응식
[CH2:1]([O:3][C:4](=[O:17])[CH2:5][C@H:6]1[C:14]2[C:9](=[CH:10][C:11]([O:15]C)=[CH:12][CH:13]=2)[CH2:8][CH2:7]1)[CH3:2].[Al+3].[Cl-].[Cl-].[Cl-].CCS>C(Cl)Cl>[CH2:1]([O:3][C:4](=[O:17])[CH2:5][C@H:6]1[C:14]2[C:9](=[CH:10][C:11]([OH:15])=[CH:12][CH:13]=2)[CH2:8][CH2:7]1)[CH3:2]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6343EthanethiolHCID 6451240Aluminum(III) ChlorideHCID 16110496Ethyl [(1S)-5-methoxy-2,3-dihydro-1H-inden-1-yl]acetate

생성물 1

HCID 16110404ethyl 2-[(1S)-5-hydroxy-2,3-dihydro-1H-inden-1-yl]acetate수율 96.3%

시약·촉매·용매 1

HCID 6344Dichloromethane용매

실험 절차

To a cold solution (ice water bath) of the compound (346 g, 1.48 mol) prepared in Example 5 in CH2Cl2 (4.2 L), was added AlCl3 (984.6 g, 7.38 mol) portionwise under argon such that the reaction temperature was maintained below 10° C. The light brown suspension was stirred for 10 min, then EtSH (546 mL, 7.38 mol) was added dropwise at such a rate that the reaction temperature was maintained below 5° C. After 2.5 h of stirring below 10° C., the reaction mixture was slowly poured into 6 L ice water with strong agitation. The organic layer was separated, and the aqueous layer was extracted with CH2Cl2 (3×1 L). The combined CH2Cl2 layers were washed with water (2×1 L), then dried over Na2SO4. The solvent was removed under reduced pressure, giving a brown oil, which was filtered through a pad of silica gel (eluted with 0-10% EtOAc/Hexanes). Fractions were collected, and the title compound (314 g, 96%) was obtained as a thick yellow oil after solvent removal and vacuum drying. 1H NMR (CDCl3) 6.92 (d, 1H), 6.62 (d, 1H), 6.55 (dd, 1H), 4.10 (q, 2H), 3.43 (q, 1H), 2.75 (m, 2H), 2.64 (dd, 1H), 2.31 (dd, 1H), 2.29 (m, 1H), 1.67 (m, 1H), 1.20 (t, 3H). MS (CI) m/z 221 [M+H]+.

후처리

  1. temperaturewas maintained below 10° C
  2. temperaturewas maintained below 5° C
  3. stirringAfter 2.5 h of stirring below 10° C.
  4. customThe organic layer was separated
  5. extractionthe aqueous layer was extracted with CH2Cl2 (3×1 L)
  6. washThe combined CH2Cl2 layers were washed with water (2×1 L)
  7. dry with materialdried over Na2SO4
  8. customThe solvent was removed under reduced pressure
  9. customgiving a brown oil, which
  10. filtrationwas filtered through a pad of silica gel (eluted with 0-10% EtOAc/Hexanes)
  11. customFractions were collected

출처 및 근거

ORD 기록
ord-d26b4a335c3a42829ab6e2f6db8c39a0
출처 데이터셋
uspto-grants-2010_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07714004B2

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트