홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Benzaldehyde → 3-(2-Benzylaminoethyl)-phenol

HRID 2248138
인쇄

반응식

HRID 2248138 반응식
O1CCCCC1OC1CCCCO1.[NH2:14][CH2:15][CH2:16][C:17]1[CH:18]=[C:19]([OH:23])[CH:20]=[CH:21][CH:22]=1.[CH:24](=O)[C:25]1[CH:30]=[CH:29][CH:28]=[CH:27][CH:26]=1.[BH4-].[Na+]>C(O)C>[CH2:24]([NH:14][CH2:15][CH2:16][C:17]1[CH:18]=[C:19]([OH:23])[CH:20]=[CH:21][CH:22]=1)[C:25]1[CH:30]=[CH:29][CH:28]=[CH:27][CH:26]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 240BenzaldehydeHCID 11492m-TyramineHCID 263182Tetrahydropyranyl etherHCID 4311764Sodium borohydride

생성물 1

HCID 198055723-(2-Benzylaminoethyl)-phenol

시약·촉매·용매 1

HCID 702Ethanol용매

반응 조건

온도
0 °C

실험 절차

A mixture of 17.6 g. (79.6 mMol) tetrahydropyran-2-yl ether of 3-(2-aminoethyl)-phenol, 150 ml. ethanol and 8.9 g. (83.5 mMol) benzaldehyde is stirred for 1 hour at ambient temperature, 3.5 g. (92 mMol) sodium borohydride are added thereto at 0° C. with vigorous stirring and the reaction allowed to continue for 1 hour at 0° C. and for 1 hour at ambient temperature. The reaction mixture is then evaporated in a vacuum and the residue mixed with diethyl ether and water. After shaking up, the ethereal phase is separated off, dried with anhydrous sodium sulphate and mixed dropwise with concentrated sulphuric acid. The precipitated sulphate is dissolved in water, some 2N hydrochloric acid is added thereto, followed by heating on a waterbath for 10 minutes and cooling. By the addition of sodium carbonate, the base is liberated. It is extracted with diethyl ether, the ethereal solution is dried with anhydrous sodium sulphate and evaporated. Yield 15.0 g. (83% of theory); m.p. 86°-88° C.

후처리

  1. additionA mixture of 17.6 g
  2. customThe reaction mixture is then evaporated in a vacuum
  3. additionthe residue mixed with diethyl ether and water
  4. stirringAfter shaking up
  5. customthe ethereal phase is separated off
  6. dry with materialdried with anhydrous sodium sulphate
  7. additionmixed dropwise with concentrated sulphuric acid
  8. dissolutionThe precipitated sulphate is dissolved in water
  9. additionsome 2N hydrochloric acid is added
  10. temperatureby heating on a waterbath for 10 minutes
  11. temperaturecooling
  12. additionBy the addition of sodium carbonate
  13. extractionIt is extracted with diethyl ether
  14. dry with materialthe ethereal solution is dried with anhydrous sodium sulphate
  15. customevaporated

출처 및 근거

ORD 기록
ord-43025aa52c3e4ad483fbae57c416ccef
출처 데이터셋
uspto-grants-1991_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05037990

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트