홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dichloromethane → 4-Acryloylamino-5-chloro-2-hydroxybenzoic acid methyl ester

HRID 2267121
인쇄

반응식

HRID 2267121 반응식
[CH3:1][O:2][C:3](=[O:13])[C:4]1[CH:9]=[C:8]([Cl:10])[C:7]([NH2:11])=[CH:6][C:5]=1[OH:12].C(Cl)Cl.[C:17](Cl)(=[O:20])[CH:18]=[CH2:19]>C(N(CC)CC)C>[CH3:1][O:2][C:3](=[O:13])[C:4]1[CH:9]=[C:8]([Cl:10])[C:7]([NH:11][C:17](=[O:20])[CH:18]=[CH2:19])=[CH:6][C:5]=1[OH:12]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6344DichloromethaneHCID 13140Acryloyl chlorideHCID 14883223Methyl 4-amino-5-chloro-2-hydroxybenzoate

생성물 1

HCID 686921384-Acryloylamino-5-chloro-2-hydroxybenzoic acid methyl ester

시약·촉매·용매 1

HCID 8471Triethylamine용매

반응 조건

온도
0 °C

실험 절차

To 4-amino-5-chloro-2-hydroxybenzoic acid methyl ester, was added DCM and triethylamine. This mixture was cooled to 0° C. and acryloyl chloride was added dropwise with stirring. After approximately 2 hours, the reaction was quenched by adding MeOH at 0° C. and the resulting mixture was stirred at room temperature for about 15 min and then concentrated in vacuo. DCM and water were added to the residue and this mixture was mixed thoroughly. The layers were separated and the aqueous layer was extracted with DCM. The organic layers were combined, dried (Na2SO4), filtered and the solvent was removed in vacuo to give 4-acryloylamino-5-chloro-2-hydroxybenzoic acid methyl ester. This ester was then combined with Preparation 1, followed by the addition of a THF-MeOH solvent. The mixture was heated and stirred for about 16 hours to provide biphenyl-2-ylcarbamic acid 1-[2-(4-formyl-3-hydroxyphenylcarbamoyl)ethyl]piperidin-4-yl ester was made. Using this ester, and following the procedure described in Example 2 and substituting the appropriate amine, the title compound was prepared. MS m/z [M+H+] calcd for C35H38N4O5, 595.7; found, 595.2.

후처리

  1. customthe reaction was quenched
  2. additionby adding MeOH at 0° C.
  3. stirringthe resulting mixture was stirred at room temperature for about 15 min
  4. concentrationconcentrated in vacuo
  5. additionDCM and water were added to the residue
  6. additionthis mixture was mixed thoroughly
  7. customThe layers were separated
  8. extractionthe aqueous layer was extracted with DCM
  9. dry with materialdried (Na2SO4)
  10. filtrationfiltered
  11. customthe solvent was removed in vacuo

출처 및 근거

ORD 기록
ord-6d64bdc2ed584db6a89272ac9ed65746
출처 데이터셋
uspto-grants-2010_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07858795B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트