홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Tetrahydrofuran → 4-(Methoxycarbonyl)bicyclo(2.2.1)heptane-1-carboxylic acid

HRID 2280790
인쇄

반응식

HRID 2280790 반응식
[C:1]12([C:12]([O:14]C)=[O:13])[CH2:7][C:4]([C:8]([O:10][CH3:11])=[O:9])([CH2:5][CH2:6]1)[CH2:3][CH2:2]2.C1COCC1.[OH-].[Na+]>CO>[CH3:11][O:10][C:8]([C:4]12[CH2:7][C:1]([C:12]([OH:14])=[O:13])([CH2:6][CH2:5]1)[CH2:2][CH2:3]2)=[O:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 8028TetrahydrofuranHCID 14798Sodium HydroxideHCID 13633974Dimethyl bicyclo[2.2.1]heptane-1,4-dicarboxylate

생성물 1

HCID 137617744-(Methoxycarbonyl)bicyclo(2.2.1)heptane-1-carboxylic acid수율 87.5%

시약·촉매·용매 1

HCID 887Methanol용매

반응 조건

온도
15 °C

실험 절차

A 12-L, 3-neck, round bottom flask was equipped with a mechanical stirrer, a J-KEM temperature controller, and a 250 mL addition funnel. The flask was charged with dimethyl bicyclo[2.2.1]heptane-1,4-dicarboxylate (208 g, 980 mmol) and THF (6.7 L). The resulting solution was cooled to 15° C. using an ice/water bath. Sodium hydroxide pellets (39.2 g, 980 mmol) were dissolved in methanol (400 mL) and slowly added to the stirring solution over 30 min. After the addition was complete, white solids began to precipitate. The reaction mixture was stirred at room temp for 16 h when TLC analysis (100% ethyl acetate) indicated about 90% conversion. The reaction mixture was concentrated to dryness, slurried in hexane (2 L), filtered, and washed with hexane (2×400 mL). The resulting sodium carboxylate salt was transferred to a 3-L, 3-neck, round bottom flask equipped with a mechanical stirrer, dissolved in water (1 L), and slowly treated with 2 N aqueous hydrochloric acid (430 mL) at 10° C. until pH ˜4. The thick suspension was diluted with ethyl acetate (1 L) and transferred to a reparatory funnel. The layers were separated and the aqueous layer was further extracted with ethyl acetate (2×500 mL), washed with brine (200 mL), dried over sodium sulfate, and concentrated to provide 170 g (87%) of 4-(methoxycarbonyl)bicyclo[2.2.1]heptane-1-carboxylic acid. 1H NMR (500 Hz, DMSO-d6) δ ppm 12.21 (s, 1H), 3.60 (s, 3H), 1.91 (d, J=6.7 Hz, 4H), 1.75 (s, 2H), 1.56-1.62 (m, 4H).

후처리

  1. additiona J-KEM temperature controller, and a 250 mL addition funnel
  2. additionslowly added to the stirring solution over 30 min
  3. additionAfter the addition
  4. customto precipitate
  5. concentrationThe reaction mixture was concentrated to dryness
  6. filtrationfiltered
  7. washwashed with hexane (2×400 mL)
  8. custom3-neck, round bottom flask equipped with a mechanical stirrer
  9. dissolutiondissolved in water (1 L)
  10. additionslowly treated with 2 N aqueous hydrochloric acid (430 mL) at 10° C. until pH ˜4
  11. additionThe thick suspension was diluted with ethyl acetate (1 L)
  12. customtransferred to a reparatory funnel
  13. customThe layers were separated
  14. extractionthe aqueous layer was further extracted with ethyl acetate (2×500 mL)
  15. washwashed with brine (200 mL)
  16. dry with materialdried over sodium sulfate
  17. concentrationconcentrated

출처 및 근거

ORD 기록
ord-595cdf1bd79c40b29a64ddf93baa4478
출처 데이터셋
uspto-grants-2015_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09139534B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트