홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethylene Oxide → Nonylcyclohexanol ethylene oxide

HRID 2305010
인쇄

반응식

HRID 2305010 반응식
[CH2:1]([C:10]1([OH:16])[CH2:15][CH2:14][CH2:13][CH2:12][CH2:11]1)[CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH3:9].C1OC1>[OH-].[Na+].C(O)(=O)C>[CH2:10]1[O:16][CH2:15]1.[CH2:1]([C:10]1([OH:16])[CH2:11][CH2:12][CH2:13][CH2:14][CH2:15]1)[CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH3:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 6354Ethylene Oxide3회HCID 12496141HCID 12496141, 화합물2회

생성물 1

HCID 18459385Nonylcyclohexanol ethylene oxide수율 461%

시약·촉매·용매 2

HCID 176Acetic Acid촉매HCID 14798Sodium Hydroxide촉매

반응 조건

온도
120 °C

실험 절차

To a 1,000 ml autoclave equipped with an ethylene oxide inlet tube, 226.5 g (1.0 mole) of nonylcyclohexanol and 0.67 g (6.7 mmoles as sodium hydroxide) of 40% aqueous sodium hydroxide solution were charged. The reaction system was substituted with nitrogen, heated to 120° C., successively evacuated to 50 mmHg, and carry out dehydration for an hour under reduced pressure. After dehydration, the system was returned to atmospheric pressure by feeding nitrogen, and heated to 150° C. While maintaining the temperature, 396.5 g (9.0 moles) of ethylene oxide was fed into the reaction system over 3 hours under gauge pressure of 0.2 to 0.4 MPa to carry out ethylene oxide addition reaction of nonylcyclohexanol. After finishing ethylene oxide charge, the reaction system was further kept at the same temperature for an hour and the catalyst was neutralized after cooling with 0.42 g (7.0 mmoles) of acetic acid to obtain 623.4 g of nonylcyclohexanol ethylene oxide adduct as white solid at room temperature. The white solid was analyzed by liquid chromatography. The solid contained 38.8% by weight of unreacted nonylcyclohexanol, 0.5% by weight of formed one molar ethylene oxide adduct of nonylcyclohexanol, 1.1% by weight of two molar adduct, 1.6% by weight of three molar adduct, 2.3% by weight of four molar adduct, 3.4% by weight of five molar adduct, 4.3% by weight of six molar adduct, 5.2% by weight of seven molar adduct, 6.3% by weight of eight molar adduct, 7.4% by weight of nine molar adduct, 6.6% by weight of ten molar adduct, 5.8% by weight of eleven molar adduct, and 4.7% by weight of twelve molar adduct, 4.1% by weight of thirteen molar adduct, 3.2% by weight of fourteen molar adduct, and 4.7% by weight of fifteen or more molar adduct.

후처리

  1. customTo a 1,000 ml autoclave equipped with an ethylene oxide inlet tube
  2. customsuccessively evacuated to 50 mmHg
  3. customfor an hour
  4. temperatureheated to 150° C
  5. additioncharge
  6. waitthe reaction system was further kept at the same temperature for an hour

출처 및 근거

ORD 기록
ord-0bb48633c08f41dba2f66f428cbd8c1a
출처 데이터셋
uspto-grants-2002_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06437194B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트