홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.2
  1. 홈
  2. /반응

Sodium Hydroxide → (2,2-Difluoro-1,3-dioxaindan-5-yl)methanol

HRID 242129
인쇄

반응식

HRID 242129 반응식
[F:1][C:2]1([F:14])[O:6][C:5]2[CH:7]=[CH:8][C:9]([C:11](O)=[O:12])=[CH:10][C:4]=2[O:3]1.COCCO[AlH2-]OCCOC.[Na+].[OH-].[Na+]>C1(C)C=CC=CC=1>[F:14][C:2]1([F:1])[O:6][C:5]2[CH:7]=[CH:8][C:9]([CH2:11][OH:12])=[CH:10][C:4]=2[O:3]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 14798Sodium HydroxideHCID 6087722,2-Difluoro-1,3-benzodioxole-5-carboxylic acidHCID 16684438Red-Al

생성물 1

HCID 12814281(2,2-Difluoro-1,3-dioxaindan-5-yl)methanol

시약·촉매·용매 1

HCID 1140Toluene용매

반응 조건

온도
20 °C

실험 절차

Commercially available 2,2-difluoro-1,3-benzodioxole-5-carboxylic acid (1.0 eq) is slurried in toluene (10 vol). Vitride® (2 eq) is added via, addition funnel at a rate to maintain the temperature at 15-25° C. At the end of addition the temperature is increased to 40° C. for 2 h then 10% (w/w) aq, NaOH (4.0 eq) is carefully added via addition funnel maintaining the temperature at 40-50° C. After stirring for an additional 30 minutes, the layers are allowed to separate at 40° C. The organic phase is cooled to 20° C. then washed with water (2×1.5 vol), dried (Na2SO4), filtered, and concentrated to afford crude (2,2-difluoro-1,3-benzodioxol-5-yl)-methanol that is used directly in the next step.

후처리

  1. additionaddition funnel at a rate
  2. additionAt the end of addition the temperature
  3. temperatureis increased to 40° C. for 2 h
  4. temperaturemaintaining the temperature at 40-50° C
  5. customto separate at 40° C
  6. temperatureThe organic phase is cooled to 20° C.
  7. washthen washed with water (2×1.5 vol)
  8. dry with materialdried (Na2SO4)
  9. filtrationfiltered
  10. concentrationconcentrated

출처 및 근거

ORD 기록
ord-b5f6b6958d34468d9aee80ac65772bf8
출처 데이터셋
uspto-grants-2014_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08653103B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트