홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Stannous chloride dihydrate → (3-Fluoro-4-methoxyphenyl)hydrazine

HRID 2423022
인쇄

반응식

HRID 2423022 반응식
[F:1][C:2]1[CH:3]=[C:4]([CH:6]=[CH:7][C:8]=1[O:9][CH3:10])[NH2:5].[N:11]([O-])=O.[Na+].O.O.[Sn](Cl)Cl>O.Cl>[F:1][C:2]1[CH:3]=[C:4]([NH:5][NH2:11])[CH:6]=[CH:7][C:8]=1[O:9][CH3:10]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 61436Stannous chloride dihydrateHCID 5811103-Fluoro-4-methoxyanilineHCID 23668193Sodium Nitrite

생성물 1

HCID 10679317(3-Fluoro-4-methoxyphenyl)hydrazine수율 50%

시약·촉매·용매 2

HCID 313Hydrochloric Acid용매2회HCID 962Water
용매

실험 절차

3-Fluoro-4-methoxyaniline (1, R1═H, R2═CH3, R3═F) (95 g, 0.67 mol) was added to concentrated hydrochloric acid (250 mL), the suspension was stirred at ambient temperature for 18 hours, then it was cooled to 0° C. and a solution of sodium nitrite (53.7 g, 0.78 mol) in water (200 mL) was added dropwise at 0-5° C. When the addition was complete, the resulting solution was stirred at 0° C. for 1 hour then it was added dropwise at 0-5° C. to a stirred solution of tin (II) chloride dihydrate (638.9 g, 2.83 mol) in concentrated hydrochloric acid (500 mL). The mixture was allowed to warm to ambient temperature then it was stored at 4° C. for 18 hours. The resulting precipitate was collected by filtration, washed with water (400 mL), and ether (1000 mL) and dried in vacuo. The solid hydrochloride salt was basified by addition to 10% aqueous sodium hydroxide solution (800 mL), the free base was extracted into ether (2×400 mL), and the combined extracts were dried (MgSO4) and the solvent removed in vacuo to give (3-fluoro-4-methoxyphenyl)hydrazine (2, R1═H, R2═CH3, R3═F) (51.9 g, 50%) as a yellow solid, mp 46-50° C; 1HNMR (CDCl3/250 MHz); 1.5 (s, 1H, NH—NH2), 3.85 (s, 3H, OCH3), 5.0 (s, 2H, NH—NH2), 6.44 (m, 1H, phenyl 6-H), 6.60 (dd, 1H, phenyl 5-H), 6.79 (t, 1H, phenyl 2-H).

후처리

  1. temperatureit was cooled to 0° C.
  2. additionWhen the addition
  3. stirringthe resulting solution was stirred at 0° C. for 1 hour
  4. temperatureto warm to ambient temperature
  5. waitit was stored at 4° C. for 18 hours
  6. filtrationThe resulting precipitate was collected by filtration
  7. washwashed with water (400 mL), and ether (1000 mL)
  8. customdried in vacuo
  9. additionThe solid hydrochloride salt was basified by addition to 10% aqueous sodium hydroxide solution (800 mL)
  10. extractionthe free base was extracted into ether (2×400 mL)
  11. dry with materialthe combined extracts were dried (MgSO4)
  12. customthe solvent removed in vacuo

출처 및 근거

ORD 기록
ord-c24ecf79d15e472b913dc46962eda002
출처 데이터셋
uspto-grants-2011_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07960544B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트