홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Aluminum(III) Chloride → 2,3,4,5-tetrahydro-1H-dibenzo[2,3:6,7]thiepino[4,5-d]azepine

HRID 247404
인쇄

반응식

HRID 247404 반응식
[H-].[Al+3].[Li+].[H-].[H-].[H-].[Cl-].[Al+3].[Cl-].[Cl-].[CH2:11]1[C:17]2[C:18]3[CH:30]=[CH:29][CH:28]=[CH:27][C:19]=3[S:20][C:21]3[CH:26]=[CH:25][CH:24]=[CH:23][C:22]=3[C:16]=2[CH2:15][CH2:14][NH:13][C:12]1=O.[H-].[Al+3].[H-].[H-]>O.C(OCC)C>[CH2:11]1[C:17]2[C:18]3[CH:30]=[CH:29][CH:28]=[CH:27][C:19]=3[S:20][C:21]3[CH:26]=[CH:25][CH:24]=[CH:23][C:22]=3[C:16]=2[CH2:15][CH2:14][NH:13][CH2:12]1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 6451240Aluminum(III) ChlorideHCID 155984691,3,4,5-tetrahydro-2H-dibenzo[2,3:6,7]thiepino[4,5-d]azepin-2-oneHCID 21226445Aluminium lithium hydrideHCID 21584524Aluminiumhydride

생성물 1

HCID 128945582,3,4,5-tetrahydro-1H-dibenzo[2,3:6,7]thiepino[4,5-d]azepine

시약·촉매·용매 2

HCID 962
Water
용매
HCID 3283Diethyl Ether용매3회

실험 절차

With stirring and excluding moisture, a suspension of 1.14 g (0.03 mole) of lithium aluminium hydride in 75 ml of abs. diethyl ether is introduced slowly in a nitrogen atmosphere to an ice-cooled solution of 4 g (0.03 mole) of aluminium chloride in 100 ml of abs. diethyl ether in such a manner that the reaction temperature does not exceed 5° C. Thereafter a suspension of 2.93 g (0.01 mole) of 1,3,4,5-tetrahydro-2H-dibenzo[2,3:6,7]thiepino[4,5-d]azepine-2-one in 50 ml of abs. diethyl ether is added and the mixture is refluxed for 24 hours. After cooling to 0°-5° C., excess aluminium hydride is decomposed cautiously by the dropwise addition of 10 ml of water. The organic phase is then separated, washed with two 30 ml portions of water, dried over sodium sulphate and concentrated, to give 2,3,4,5-tetrahydro-1H-dibenzo[2,3:6,7]thiepino[4,5-d]azepine as residue, which melts at 142°-143° C. after recrystallisation from methanol. Melting point of the methanesulphonate: 305°-307° C.

후처리

  1. customdoes not exceed 5° C
  2. temperaturethe mixture is refluxed for 24 hours
  3. temperatureAfter cooling to 0°-5° C.
  4. customThe organic phase is then separated
  5. washwashed with two 30 ml portions of water
  6. dry with materialdried over sodium sulphate
  7. concentrationconcentrated

출처 및 근거

ORD 기록
ord-23bc760f096746aead74e06c898dcb5c
출처 데이터셋
uspto-grants-1987_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04707476

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트