홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Nitrogen → 1-Octene

HRID 248665
인쇄

반응식

HRID 248665 반응식
C(Cl)Cl.[Al+3].[Cl-].[Cl-].[Cl-].N#N.[CH2:10](Cl)[CH2:11][CH2:12][CH3:13]>>[CH2:13]=[CH:12][CH2:11][CH2:10][CH2:10][CH2:11][CH2:12][CH3:13].[CH2:13]=[CH:12][CH2:11][CH2:10][CH2:10][CH2:11][CH2:12][CH2:13][CH2:10][CH2:11][CH2:12][CH3:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 947NitrogenHCID 6344DichloromethaneHCID 8005Butyl Chloride3회HCID 6451240Aluminum(III) Chloride2회

생성물 2

HCID 81251-OcteneHCID 81831-Dodecene

반응 조건

온도
15 °C

실험 절차

A two liter reactor is equipped with a stirrer, addition funnel, thermometer, condenser and a cooling bath. A solution of 300 g (2.68 moles) 1-octene, 300g (1.79 moles) 1-dodecene and 3.9 g (0.042 moles) normal butyl chloride was prepared and charged to the addition funnel. To the reactor was charged 300 ml. dry methylene chloride and 12.0 g anhydrous AlCl3. A N2 atmosphere was maintained throughout the polymerization procedure. The stirred AlCl3 slurry was cooled to 15° C., whereupon a dropwise addition of the comonomer/n-butyl chloride solution was initiated and continued over 3.0 hours into the reactor. The polymerization temperature was maintained at 15° C.±1° C. After the comonomer/n-butyl chloride charge was complete, the polymerization mixture was stirred for an additional 3.0 hours at 15° C.

후처리

  1. customA two liter reactor is equipped with a stirrer, addition funnel
  2. additioncharged to the addition funnel
  3. additionTo the reactor was charged 300 ml
  4. temperatureThe polymerization temperature was maintained at 15° C.±1° C

출처 및 근거

ORD 기록
ord-1ae6010f66304575b80f050ac10bb01f
출처 데이터셋
uspto-grants-1993_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05210362

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트