홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Carbon Dioxide → 1-(3-chloro-2-pyridinyl)-3-(trifluoromethyl)-1H-pyrazole-5-carboxylic acid

HRID 251908
인쇄

반응식

HRID 251908 반응식
[Cl:1][C:2]1[C:3]([N:8]2[CH:12]=[CH:11][C:10]([C:13]([F:16])([F:15])[F:14])=[N:9]2)=[N:4][CH:5]=[CH:6][CH:7]=1.C([N-]C(C)C)(C)C.[Li+].[C:25](=[O:27])=[O:26].[OH-].[Na+]>CCCCCCC.O1CCCC1.C(C1C=CC=CC=1)C.CCCCCC.O.O1CCCC1>[Cl:1][C:2]1[C:3]([N:8]2[C:12]([C:25]([OH:27])=[O:26])=[CH:11][C:10]([C:13]([F:16])([F:14])[F:15])=[N:9]2)=[N:4][CH:5]=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 4

HCID 280Carbon DioxideHCID 14798Sodium HydroxideHCID 2724682Lithium diisopropylamideHCID 179762913-chloro-2-(3-(trifluoromethyl)-1H-pyrazol-1-yl)pyridine

생성물 1

HCID 113921841-(3-chloro-2-pyridinyl)-3-(trifluoromethyl)-1H-pyrazole-5-carboxylic acid

시약·촉매·용매 4

HCID 962
Water
용매
HCID 8028Tetrahydrofuran용매
HCID 8058Hexane용매
HCID 22742125Tetrahydrofuran heptane ethylbenzol용매

반응 조건

온도
-78 °C

실험 절차

To a mixture of 15 g of 3-chloro-2-(3-trifluoromethyl-1H-pyrazol-1-yl)pyridine and 150 ml of tetrahydrofuran was added dropwise 39 ml of a 2.0 mol/L lithium diisopropylamide solution in heptane/tetrahydrofuran/ethylbenzene at −78° C., and then stirred at −78° C. for 15 minutes. Carbon dioxide was introduced into the mixture at such a rate that the inner temperature was retained at −60° C. or lower. After the mixture turned yellow, it was further stirred at −78° C. for 10 minutes. After the temperature of the reaction mixture was allowed to rise to room temperature, 200 ml of water and 200 ml of hexane were poured. The aqueous layer was adjusted to pH 10-12 by an addition of a 2N aqueous sodium hydroxide solution and then layers were separated. The organic layer was extracted with a 0.5N aqueous sodium hydroxide solution. The aqueous layers were combined, washed with diethyl ether, adjusted to around pH 3 by an addition of 2N hydrochloric acid, and then extracted with methyl tert-butyl ether three times. The organic layers were combined, washed with an aqueous saturated sodium chloride solution, dried over magnesium sulfate, and concentrated under reduced pressure to obtain 16.08 g of 1-(3-chloro-2-pyridinyl)-3-trifluoromethyl-1H-pyrazole-5-carboxylic acid of the formula:

후처리

  1. customwas retained at −60° C.
  2. stirringit was further stirred at −78° C. for 10 minutes
  3. customto rise to room temperature
  4. customlayers were separated
  5. extractionThe organic layer was extracted with a 0.5N aqueous sodium hydroxide solution
  6. washwashed with diethyl ether
  7. additionadjusted to around pH 3 by an addition of 2N hydrochloric acid
  8. extractionextracted with methyl tert-butyl ether three times
  9. washwashed with an aqueous saturated sodium chloride solution
  10. dry with materialdried over magnesium sulfate
  11. concentrationconcentrated under reduced pressure

출처 및 근거

ORD 기록
ord-2c107bb83a3b41308a4f24e49502be2d
출처 데이터셋
uspto-grants-2011_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07867949B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트