홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Cyanamide → (1-{6-[Trifluoromethyl]pyridin-3-yl}ethyl)(methyl)lambda4-sulfanylidenecyanamide

HRID 252204
인쇄

반응식

HRID 252204 반응식
[N:1]#[C:2][NH2:3].[CH3:4][S:5][CH:6]([C:8]1[CH:9]=[N:10][C:11]([C:14]([F:17])([F:16])[F:15])=[CH:12][CH:13]=1)[CH3:7].Cl[O-].[Ca+2].Cl[O-].S(S([O-])=O)([O-])(=O)=O.[Na+].[Na+]>C(#N)C>[C:2]([N:3]=[S:5]([CH:6]([C:8]1[CH:9]=[N:10][C:11]([C:14]([F:17])([F:16])[F:15])=[CH:12][CH:13]=1)[CH3:7])[CH3:4])#[N:1]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 9864CyanamideHCID 24504Calcium hypochlorite2회HCID 656671Sodium PyrosulfiteHCID 248811195-[1-(Methylthio)ethyl]-2-trifluoromethylpyridine

생성물 1

HCID 44139272(1-{6-[Trifluoromethyl]pyridin-3-yl}ethyl)(methyl)lambda4-sulfanylidenecyanamide

시약·촉매·용매 1

HCID 6342
Acetonitrile
용매

반응 조건

온도
-5 °C

실험 절차

Acetonitrile (50 mL), cyanamide (1.14 grams, 27.1 mmoles) and 3-[1-(methylthio)ethyl]-6-(trifluoromethyl)pyridine (5.00 grams, 22.6 mmoles, 99+% assay) were combined in a 100 mL, 3-necked round bottom flask equipped with a thermowell/K-thermocouple, stopper, nitrogen oil bubbler and magnetic stir bar. The stirred solution was cooled to about −5° C. with an acetone/ice bath. To this solution was added 55.96 grams of an aqueous 6.0 wt % calcium hypochlorite solution (3.36 grams of calcium hypochlorite, 23.5 mmoles, 65% available chlorine) dropwise over 44 minutes. Some undissolved solids were present in the calcium hypochlorite solution and were added as well. The temperature was kept below 0° C. during the addition. The pale yellow reaction mixture was allowed to stir at about 0° C. for 65 minutes. To the yellow reaction mixture was added 0.53 g (2.8 mmoles) of sodium metabisulfite, in portions as a solid to destroy any remaining oxidant. A white flocculant was present in the reaction mixture. It was removed by vacuum filtration of the entire reaction mixture through a medium sintered glass filter funnel. The filtrate was transferred to a separatory funnel and the phases were allowed to settle. The phases were separated and the aqueous phase re-extracted with acetonitrile (10 mL) and (15 mL). Sodium chloride (10.01 grams) was added to the aqueous phase during the second extraction to facilitate a phase break. The organics were combined and this acetonitrile/sulfilimine solution was used directly in the following oxidation. LC analysis indicated a 1.00:1.08 area ratio of the two sulfilimine isomers and showed sulfilimine at 80 area % and sulfoxide (two isomers) at 13 area %.

후처리

  1. customequipped with a thermowell/K-thermocouple, stopper, nitrogen oil bubbler and magnetic stir bar
  2. additionwere added as well
  3. additionThe temperature was kept below 0° C. during the addition
  4. customin portions as a solid to destroy any remaining oxidant
  5. customIt was removed by vacuum filtration of the entire reaction mixture through a medium sintered glass
  6. filtrationfilter funnel
  7. customThe filtrate was transferred to a separatory funnel
  8. customThe phases were separated
  9. extractionthe aqueous phase re-extracted with acetonitrile (10 mL) and (15 mL)
  10. additionSodium chloride (10.01 grams) was added to the aqueous phase during the second extraction

출처 및 근거

ORD 기록
ord-ddb394a6b8ca4150b3ed84e610ed2391
출처 데이터셋
uspto-grants-2011_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07868027B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트