홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ammonia → Silicon tetramethoxide

HRID 252896
인쇄

반응식

HRID 252896 반응식
[CH3:1][OH:2].N.[Si:4](OC)(OC)(OC)[O:5][CH3:6]>C(O)(C)C>[CH3:6][O-:5].[CH3:1][O-:2].[CH3:6][O-:5].[CH3:6][O-:5].[Si+4:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 222AmmoniaHCID 887MethanolHCID 12682Tetramethoxysilane2회

생성물 1

HCID 21871620Silicon tetramethoxide

시약·촉매·용매 1

HCID 3776Isopropanol용매

반응 조건

온도
40 °C

실험 절차

The fine particles used were composite inorganic fine particles of silica and titania (average particle diameter: 100 nm). The fine particles were produced in the following manner according to the method disclosed in Production Example and Example of JP-A-7-2520. 140 g of methanol, 260 g of isopropanol and 100 g of aqueous ammonia (25% by weight) were charged in a 4-L glass reactor equipped with stirring blades to prepare a reaction solution, which was stirred while the temperature of the reaction solution was maintained to 40° C. 542 g of silicon tetramethoxide (Si(OMe)4, Methyl Silicate 39, a trade name, produced by Colcoat Co., Ltd.) was charged in a 3-L conical flask, and 195 g of methanol and 28 g of a 0.1% by weight aqueous solution of hydrochloric acid (obtained by diluting 35% hydrochloric acid, produced by Wako Pure Chemical Industries, Ltd. with water to 1/1,000) were added thereto under stirring, followed by further stirring for about 10 minutes. Subsequently, a solution obtained by diluting 300 g of titanium tetraisopropoxide (Ti(O-i-Pr)4, A-1 (TPT), a trade name, produced by Nippon Soda Co., Ltd.) with 634 g of isopropanol was added thereto to obtain a transparent uniform solution (copolycondensate of silicon tetraalkoxide and titanium tetraalkoxide). 1,699 g of the uniform solution and 480 g of aqueous ammonia (25% by weight) were simultaneously added dropwise to the aforementioned reaction solution over 2 hours at a small dropping rate in the initial stage, which was gradually increased toward the final stage. After completing the dropwise addition, the resulting cohydrolyzate was filtered and dried at 50° C. to remove the organic solvents, and it was then dispersed in water to obtain fine particles having a concentration of 10% by weight and a refractive index of 1.56.

후처리

  1. customThe fine particles were produced in the following manner
  2. customequipped with stirring blades
  3. customto prepare a reaction solution, which

출처 및 근거

ORD 기록
ord-0f015da9bd7a4e66925f6f836b01ca75
출처 데이터셋
uspto-grants-2011_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07871691B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트