홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → (4-Chloro-2-fluorophenyl)hydrazine

HRID 258494
인쇄

반응식

HRID 258494 반응식
[Cl:1][C:2]1[CH:8]=[CH:7][C:5]([NH2:6])=[C:4]([F:9])[CH:3]=1.[N:10]([O-])=O.[Na+].O>Cl>[Cl:1][C:2]1[CH:8]=[CH:7][C:5]([NH:6][NH2:10])=[C:4]([F:9])[CH:3]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 962WaterHCID 938984-Chloro-2-fluoroanilineHCID 23668193Sodium Nitrite

생성물 1

HCID 2782934(4-Chloro-2-fluorophenyl)hydrazine

시약·촉매·용매 1

HCID 313Hydrochloric Acid용매2회

실험 절차

Alternatively, 4-chloro-2-fluorophenyl hydrazine is prepared by the following method. 43.7 parts of 4-chloro-2-fluoroaniline was dissolved in 735 parts of concentrated hydrochloric acid. The solution was cooled to 0°-5° C. and a solution of 22.8 parts of sodium nitrite in 187 parts water was added dropwise maintaining the temperature of the reaction between 0°-5°. The excess nitrite was destroyed by the addition of small amounts of sulfamic acid until a negative test with sulfone reagent was obtained. To the solution of the diazonium salt was added, as rapidly as possible, a solution of 170 parts stannous chloride dihydrate in 275 parts of concentrated hydrochloric acid, precooled to -50°. When the addition was complete, a heavy white precipitate formed. The reaction mixture was allowed to warm to ambient temperature over one hour. The precipitate was collected by filtration, then suspended in 750 parts ice-water. The pH of the solution was adjusted to 11 by the addition of 50% aqueous sodium hydroxide. The resulting aqueous suspension was extracted three times; 200 parts of methylene chloride was used for each extraction. The combined organic extracts were dried with anhydrous magnesium sulfate, and the solvent removed under reduced pressure of 300 mm Hg to leave 38.5 parts of pinkish-tan crystalline 4-chloro-2-fluoro-phenylhydrazine, mp 51°-63°.

후처리

  1. customAlternatively, 4-chloro-2-fluorophenyl hydrazine is prepared by the following method
  2. temperatureThe solution was cooled to 0°-5° C.
  3. temperaturemaintaining
  4. customthe temperature of the reaction between 0°-5°
  5. customThe excess nitrite was destroyed by the addition of small amounts of sulfamic acid until a negative test with sulfone reagent
  6. customwas obtained
  7. customprecooled to -50°
  8. additionWhen the addition
  9. customa heavy white precipitate formed
  10. filtrationThe precipitate was collected by filtration
  11. additionThe pH of the solution was adjusted to 11 by the addition of 50% aqueous sodium hydroxide
  12. extractionThe resulting aqueous suspension was extracted three times
  13. extraction200 parts of methylene chloride was used for each extraction
  14. dry with materialThe combined organic extracts were dried with anhydrous magnesium sulfate
  15. customthe solvent removed under reduced pressure of 300 mm Hg

출처 및 근거

ORD 기록
ord-0c177222e0cc46d7bde51825e6fe527a
출처 데이터셋
uspto-grants-1977_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04033751

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트