홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ozone → (RS)-2-(2-oxoethyl)-6-chloro-1-indanone

HRID 264374
인쇄

반응식

HRID 264374 반응식
[O:1]=[O+][O-].[CH2:4]([CH:8]1[CH2:16][C:15]2[C:10](=[CH:11][C:12]([Cl:17])=[CH:13][CH:14]=2)[C:9]1=[O:18])[CH:5]=CC>ClCCl.CO>[O:1]=[CH:5][CH2:4][CH:8]1[CH2:16][C:15]2[C:10](=[CH:11][C:12]([Cl:17])=[CH:13][CH:14]=2)[C:9]1=[O:18]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 24823Ozone2회HCID 54260426(RS)-2-(2-buten-1-yl)-6-chloro-1-indanone

생성물 1

HCID 10608460(RS)-2-(2-oxoethyl)-6-chloro-1-indanone수율 85%

시약·촉매·용매 2

HCID 887Methanol용매HCID 6344Dichloromethane용매

실험 절차

An ozone stream (3 g ozone/hour) was conducted for 45 minutes while stirring through a solution, cooled to -70°, of 10.3 g of (RS)-2-(2-buten-1-yl)-6-chloro-1-indanone in 200 ml of anhydrous dichloro-methane and 100 ml of anhydrous methanol. Subsequently, the mixture was flushed with oxygen for 5 minutes and with argon for 10 minutes. After the addition of 5.13 ml of dimethyl sulfide, the mixture was stirred at room temperature for 16 hours. The reaction mixture was evaporated in a vacuum. The residue was treated with 60 ml of dichoromethane and, after the addition of 15 ml of water and 15 ml of trifluoroacetic acid, stirred at room temperature for 3 hours. The mixture was subsequently poured into 150 ml of water and neutralized by the spatula-wise addition of sodium hydrogen carbonate while stirring. An additional 100 ml of water were added, the phases were separated and the aqueous phase was extracted twice with 150 ml of dichloromethane each time. The combined organic phases were dried over magnesium sulfate, concentrated in a vacuum and the crude product obtained was recrystallized from ethyl acetate/hexane. 8.29 g (85%) of (RS)-2-(2-oxoethyl)-6-chloro-1-indanone were obtained as a white solid with m.p. 80°.

후처리

  1. customSubsequently, the mixture was flushed with oxygen for 5 minutes and with argon for 10 minutes
  2. additionAfter the addition of 5.13 ml of dimethyl sulfide
  3. stirringthe mixture was stirred at room temperature for 16 hours
  4. customThe reaction mixture was evaporated in a vacuum
  5. additionThe residue was treated with 60 ml of dichoromethane
  6. additionafter the addition of 15 ml of water and 15 ml of trifluoroacetic acid
  7. stirringstirred at room temperature for 3 hours
  8. additionThe mixture was subsequently poured into 150 ml of water
  9. additionneutralized by the spatula-wise addition of sodium hydrogen carbonate
  10. stirringwhile stirring
  11. additionAn additional 100 ml of water were added
  12. customthe phases were separated
  13. extractionthe aqueous phase was extracted twice with 150 ml of dichloromethane each time
  14. dry with materialThe combined organic phases were dried over magnesium sulfate
  15. concentrationconcentrated in a vacuum
  16. customthe crude product obtained
  17. customwas recrystallized from ethyl acetate/hexane

출처 및 근거

ORD 기록
ord-592e41c62ee94dc6bd89b83bb370bd05
출처 데이터셋
uspto-grants-1997_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05646173

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트