홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Chloride → Thiazole, 2-chloro-5-(2-chloroethyl)-4-methyl-

HRID 265643
인쇄

반응식

HRID 265643 반응식
[C:1]([S-:3])#[N:2].[Na+].Cl[CH:6]([CH2:10][CH2:11][Cl:12])[C:7](=O)[CH3:8].[Cl-:13].[Na+]>C(OCCCC)(=O)C.O>[Cl:13][C:1]1[S:3][C:6]([CH2:10][CH2:11][Cl:12])=[C:7]([CH3:8])[N:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 5234Sodium ChlorideHCID 940323,5-Dichloropentan-2-oneHCID 516871Sodium thiocyanate

생성물 1

HCID 207964Thiazole, 2-chloro-5-(2-chloroethyl)-4-methyl-수율 66%

시약·촉매·용매 2

HCID 962Water용매HCID 31272Butyl Acetate용매

반응 조건

온도
10 °C

실험 절차

83 g (1.024 moles) of sodium rhodanide are added to a solution of 155.5 g (1 mole) of 3,5-dichloro-2-pentanone in 1 litre of butyl acetate. The suspension is stirred for 4 hours in hot water bath. After cooling the sodium chloride formed is filtered off and the filtrate is washed 3 times with water and dried over sodium sulfate. After filtering off the drying agent the light red-brown filtrate is cooled under 10° C. by icy water and saturated with gaseous hydrochloric acid under stirring, keeping the temperature under 10° C. After saturation the reaction mixture is stirred for further 20 minutes under cooling, then the temperature is increased slowly to 40° C. The reaction mixture is stirred at this temperature for 20 minutes and poured onto ice after cooling down to room temperature. The phases are separated, the aqueous phase is shaken with 150 cm3 of butyl acetate. The combined butyl acetate solutions are washed neutral with water and 5% sodium hydrogen carbonate solution, then dried over sodium sulfate. After distilling off the solvent the residue is distilled off under reduced pressure to obtain 121 g (66%) of 2-chloro-4-methyl-5-(2-chloroethyl)-thiazole in the form of pale yellow oil, which is identical in every respect with the product obtained in Example 1.

후처리

  1. customformed
  2. filtrationis filtered off
  3. washthe filtrate is washed 3 times with water
  4. dry with materialdried over sodium sulfate
  5. filtrationAfter filtering off the drying agent the light red-brown filtrate
  6. customunder 10° C
  7. stirringAfter saturation the reaction mixture is stirred for further 20 minutes
  8. temperatureunder cooling
  9. temperaturethe temperature is increased slowly to 40° C
  10. stirringThe reaction mixture is stirred at this temperature for 20 minutes
  11. additionpoured onto ice
  12. temperatureafter cooling down to room temperature
  13. customThe phases are separated
  14. stirringthe aqueous phase is shaken with 150 cm3 of butyl acetate
  15. washThe combined butyl acetate solutions are washed neutral with water and 5% sodium hydrogen carbonate solution
  16. dry with materialdried over sodium sulfate
  17. distillationAfter distilling off the solvent the residue
  18. distillationis distilled off under reduced pressure

출처 및 근거

ORD 기록
ord-573a4c5a257f403399d3453ffeaf7383
출처 데이터셋
uspto-grants-1997_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05648498

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트