홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Isopropylamine → 1,3,5-Triazin-2-amine, 4,6-dichloro-N-(1-methylethyl)-

HRID 27222
인쇄

반응식

HRID 27222 반응식
[N:1]1[C:8]([Cl:9])=[N:7][C:5](Cl)=[N:4][C:2]=1[Cl:3].[CH:10]([NH2:13])([CH3:12])[CH3:11].[OH-].[Na+]>C(OCC)(=O)C>[Cl:9][C:8]1[N:1]=[C:2]([Cl:3])[N:4]=[C:5]([NH:13][CH:10]([CH3:12])[CH3:11])[N:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6363IsopropylamineHCID 7954Cyanuric chlorideHCID 14798Sodium Hydroxide

생성물 1

HCID 194531,3,5-Triazin-2-amine, 4,6-dichloro-N-(1-methylethyl)-

시약·촉매·용매 1

HCID 8857Ethyl Acetate용매

반응 조건

온도
-15 °C

실험 절차

A suspension of 369 g of cyanuric chloride in 1000 ml of ethyl acetate is cooled to -15° C. With good stirring, 124 g of isopropylamine are first added dropwise at -20° C. to -10° C. in the course of 21/2 hours, followed by 267 g of a 30% aqueous solution of sodium hydroxide in the course of one hour. The reaction mixture is stirred for a further 11/2 hours at the same temperature, then the organic phase is separated, washed with two 100 ml portions of water and dried over sodium sulphate. The solvent is evaporated, to yield an oil from which the 2,4-dichloro-6-isopropylamino-s-triazine precipitates in crystalline form after stirring with petroleum ether at low temperature. Melting point: 46°-47° C.

후처리

  1. customthe organic phase is separated
  2. washwashed with two 100 ml portions of water
  3. dry with materialdried over sodium sulphate
  4. customThe solvent is evaporated

출처 및 근거

ORD 기록
ord-32cef9d776e644fa9ed2f82788d54e0e
출처 데이터셋
uspto-grants-1980_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04220770

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트