홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acetone → 2,3:4,5-Di-o-isopropylidene-beta-D-fructopyranose

HRID 273907
노트
인쇄 미리보기

반응식

HRID 273907 반응식
[CH3:1][C:2]([CH3:4])=[O:3].S(=O)(=O)(O)O.[OH:10][CH2:11][C:12]([C@H:14]([C@@H:16]([C@@H:18]([CH2:20][OH:21])O)[OH:17])[OH:15])=[O:13].[OH-].[Na+].CO[C:26](C)([CH3:28])[CH3:27]>CCCCCC.C(O)(C)C>[CH3:1][C:2]1([CH3:4])[O:17][C@@H:16]2[C@@H:18]([CH2:20][O:21][C@@:12]3([CH2:11][OH:10])[O:13][C:26]([CH3:28])([CH3:27])[O:15][C@H:14]32)[O:3]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 180AcetoneHCID 1118Sulfuric AcidHCID 5984D-(-)-Fructose2회HCID 14798Sodium HydroxideHCID 15413tert-Butyl methyl ether

생성물 1

HCID 102443452,3:4,5-Di-o-isopropylidene-beta-D-fructopyranose수율 62.4%

시약·촉매·용매 2

HCID 3776Isopropanol용매
HCID 8058Hexane용매

반응 조건

온도
5 °C

실험 절차

Under nitrogen, acetone (144.0 L, 113.0 kg, 1946 mol) was cooled to 0°-10° C. With stirring, concentrated sulfuric acid (7.2 L, 13.2 kg, 135.6 mol) was added gradually (approx. 0.5 h) so that the temperature did not exceed 20° C. (jacket temperature at -15° C.). External cooling was discontinued and D-fructose (12.0 kg, 66.6 mol) was added gradually (in 2.0 kg portions) over 2 h while maintaining the temperature between 8°-15° C. The suspension was stirred at room temperature for an additional 2-3 h after all the fructose had dissolved. The solution was then cooled to 5° C. and 50% sodium hydroxide (24.0 kg, 297.6 mol) was added at a rate so as to maintain the solution temperature below 20° C. (addition was complete in 1 h with a jacket temperature at -15° C.). The resulting slurry was centrifuged to remove the precipitated salt (sodium sulfate). Solvent was removed from the filtrate by vacuum distillation and the residual oil was stored at room temperature. The semi-solid reaction product was dissolved in t-butyl methyl ether (48.8 kg, 66.4 L). The solution was washed with distilled water (2×9.0 L) and concentrated to give an oil. The oil was dissolved in hexane (24.0 L)/isopropanol (3.5 L) with gradual warming to 60° C. The product crystallized with cooling. The solid was collected by centrifugation and dried in a vacuum oven at 38° C. for 8.0 h to give 10.8 kg (62.4% yield, 100.8% purity by GLC) of a white solid, mp 95°-96° C.

후처리

  1. customdid not exceed 20° C.
  2. custom(jacket temperature at -15° C.)
  3. temperatureExternal cooling
  4. temperaturewhile maintaining the temperature between 8°-15° C
  5. dissolutionhad dissolved
  6. temperatureto maintain the solution temperature below 20° C. (
  7. additionaddition
  8. customto remove the precipitated salt (sodium sulfate)
  9. customSolvent was removed from the filtrate by vacuum distillation
  10. customwas stored at room temperature
  11. customThe semi-solid reaction product
  12. washThe solution was washed with distilled water (2×9.0 L)
  13. concentrationconcentrated
  14. customto give an oil
  15. temperaturewith gradual warming to 60° C
  16. customThe product crystallized
  17. temperaturewith cooling
  18. customThe solid was collected by centrifugation
  19. customdried in a vacuum oven at 38° C. for 8.0 h
  20. customto give 10.8 kg (62.4% yield, 100.8% purity by GLC) of a white solid, mp 95°-96° C.

출처 및 근거

ORD 기록
ord-d43663d6b464498cbd06439c3fad2f2d
출처 데이터셋
uspto-grants-1995_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05387700

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트