홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethylformamide → Methyl 2-vinylnicotinate

HRID 274854
인쇄

반응식

HRID 274854 반응식
Cl[C:2]1[C:7]([C:8]([O:10][CH3:11])=[O:9])=[CH:6][CH:5]=[CH:4][N:3]=1.[CH:12]([Sn](CCCC)(CCCC)CCCC)=[CH2:13].C(C1C=C(C)C=C(C(C)(C)C)C=1O)(C)(C)C.CN(C)C=O>[Pd].C(OCC)(=O)C.C1C=CC(P(C2C=CC=CC=2)C2C=CC=CC=2)=CC=1.C1C=CC(P(C2C=CC=CC=2)C2C=CC=CC=2)=CC=1.Cl[Pd]Cl>[CH:12]([C:2]1[C:7]([C:8]([O:10][CH3:11])=[O:9])=[CH:6][CH:5]=[CH:4][N:3]=1)=[CH2:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 6228DimethylformamideHCID 314042,6-Di-tert-butyl-4-methylphenolHCID 81998Tributylvinyltin2회HCID 819931Methyl 2-chloronicotinate

생성물 1

HCID 21862216Methyl 2-vinylnicotinate

시약·촉매·용매 3

HCID 23938Palladium촉매
HCID 6102075
Dichlorobis(triphenylphosphine)palladium
촉매
HCID 8857Ethyl Acetate용매

반응 조건

온도
55 °C

실험 절차

2-Ethenyl-3-pyridinecarboxylic acid, methyl ester (12) is prepared as follows: a mixture of 19.7 g (115 mmol) of 2-chloro-3-pyridinecarboxylic acid, methyl ester (11), 38.3 g (120.8 mmol) of vinyltributyltin, 1.48 g (2.1 mmol) of bis(triphenylphosphine)palladium (II) chloride 100 mg of 2,6-ditertbutyl-4-methylphenol, and 250 mL of N,N-dimethylformamide is stirred at 55° C. for 7 hours, then treated with 1.63 g 15.1 mmol) of additional vinyltributyltin and 1 g of palladium catalyst. The mixture is heated further at 40° C. for 61 hours, then concentrated at 60° C./5 mm to leave a greenish oil that is dissolved in ethyl acetate and filtered through a pad of silica gel (230-400 mesh). The filtrate is diluted with additional ethyl acetate and the organic phase is washed with water, dried, and concentrated to an oil. The oil is distilled, with material collected in the 80°-95° C./0.14 mm ranger to leave 24.5 g of an oil that is ca. 75% product by GC. The oil is dissolved in dichloromethane:hexanes (1:1) and loaded onto an 8 x 15 cm of silica gel column (230-400 mesh). The column is eluted with the same solvent as above with 500 mL fractions collected. Product fractions are combined and carefully distilled at 65°-67° C./0.15 mm to leave 13.6 g of clear oil, >95% pure by GC, that is sufficiently pure to use directly in the next step.

후처리

  1. temperatureThe mixture is heated further at 40° C. for 61 hours
  2. concentrationconcentrated at 60° C./5 mm
  3. customto leave a greenish oil that
  4. filtrationfiltered through a pad of silica gel (230-400 mesh)
  5. additionThe filtrate is diluted with additional ethyl acetate
  6. washthe organic phase is washed with water
  7. customdried
  8. concentrationconcentrated to an oil
  9. distillationThe oil is distilled, with material
  10. customcollected in the 80°-95° C./0.14 mm ranger

출처 및 근거

ORD 기록
ord-b7b5d8a724604f80800b2e11dc4c62c3
출처 데이터셋
uspto-grants-1995_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05391554

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트