홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Cumene → 1-Ethenyl-4-methylbenzene

HRID 280764
인쇄

반응식

HRID 280764 반응식
C1(C(C)C)C=CC=CC=1.[CH2:10]([C:12]1[CH:17]=[CH:16][C:15]([CH3:18])=[CH:14][CH:13]=1)[CH3:11]>>[CH3:18][C:15]1[CH:16]=[CH:17][C:12]([CH:10]=[CH2:11])=[CH:13][CH:14]=1
참가 물질실험 절차출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 7406CumeneHCID 121601-Ethyl-4-Methylbenzene

생성물 1

HCID 121611-Ethenyl-4-methylbenzene

실험 절차

This example illustrates the dehydrogenation of cumene and p-ethyltoluene using a diluent comprising steam and nitrogen. Three and three-tenths of the catalyst prepared in Example I, ground to 18 to 40 mesh, was employed in the reactor described in Example I. Initially p-ethyltoluene was flowed into the reactor at 0.38 liquid hourly space velocity, 11:1 diluent to p-ethyltoluene ratio (8:1 steam and 3:1 nitrogen) at 588° C. yielding a relatively poor conversion and selectivity. The catalyst was decoked with 5% oxygen and nitrogen for about 1 hr. Cumene was then run at 0.38 liquid hourly space velocity, 11:1 diluent ratio (8:1 steam and 3:1 nitrogen) at 588° C. providing 40% conversion to alphamethylstyrene and 88% selectivity. The feed was then switched from cumene to p-ethyltoluene using the same diluent dilution and conditions providing 22% conversion to p-methylstyrene and 93% selectivity. Conditions were then changed to 0.72 liquid hourly space velocity, 10:1 diluent ratio for the p-ethyltoluene (8:1 steam and 2:1 nitrogen) at 598° C. yielding 40% conversion and 92% selectivity to p-methylstyrene.

출처 및 근거

ORD 기록
ord-b542245148e14f4083e732f13e7f3b76
출처 데이터셋
uspto-grants-1986_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04590324

반응 노트

이 페이지에서참가 물질실험 절차출처 및 근거반응 노트