홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methylhydrazine → 1,5-Dimethyl-3-(trifluoromethyl)pyrazole

HRID 327019
인쇄

반응식

HRID 327019 반응식
[F:1][C:2]([F:10])([F:9])[C:3](=O)[CH2:4][C:5](=O)[CH3:6].[CH3:11][NH:12][NH2:13]>C(O)C>[CH3:11][N:12]1[C:5]([CH3:6])=[CH:4][C:3]([C:2]([F:10])([F:9])[F:1])=[N:13]1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 6061MethylhydrazineHCID 739431,1,1-Trifluoro-2,4-pentanedione

생성물 1

HCID 127475251,5-Dimethyl-3-(trifluoromethyl)pyrazole수율 95%

시약·촉매·용매 1

HCID 702Ethanol용매2회

실험 절차

To a solution 25.0 grams of 1,1,1,-trifluoro-2,4-pentanedione in 150 ml of ethanol (anhydrous, 5% methanol) at 10 C. was added dropwise over 35 minutes a solution 8.3 grams of methyl hydrazine in 25 ml of ethanol. The reaction temperature did not exceed 20 C. After an additional 30 minutes of stirring, the cooling bath was removed and the reaction was allowed to stir for one hour. Then five ml of glacial acetic acid was added and the reaction was refluxed for four hours. The reaction was then concentrated under reduced pressure and 100 ml of toluene was added to help azeotrope the residual acetic acid during a second concentration under reduced pressure. High vacuum was pulled on the sample for one hour at 50 C. to yield 25.3 g of the desired product as an oil.

후처리

  1. customthe cooling bath was removed
  2. stirringto stir for one hour
  3. additionThen five ml of glacial acetic acid was added
  4. temperaturethe reaction was refluxed for four hours
  5. concentrationThe reaction was then concentrated under reduced pressure and 100 ml of toluene
  6. additionwas added
  7. concentrationduring a second concentration under reduced pressure
  8. waitHigh vacuum was pulled on the sample for one hour at 50 C

출처 및 근거

ORD 기록
ord-f4f3b45936844500a753d4a94cbf349a
출처 데이터셋
uspto-grants-1993_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05272128

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트