홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Phosphorus oxychloride → 4-Chloro-6,7-dimethoxyquinoline

HRID 331208
인쇄

반응식

HRID 331208 반응식
[CH3:1][O:2][C:3]1[CH:4]=[C:5]2[C:10](=[CH:11][C:12]=1[O:13][CH3:14])[N:9]=[CH:8][CH:7]=[C:6]2O.P(Cl)(Cl)([Cl:18])=O>C(#N)C>[Cl:18][C:6]1[C:5]2[C:10](=[CH:11][C:12]([O:13][CH3:14])=[C:3]([O:2][CH3:1])[CH:4]=2)[N:9]=[CH:8][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 24813Phosphorus oxychloride2회HCID 178486804HCID 178486804, 화합물

생성물 1

HCID 4596104-Chloro-6,7-dimethoxyquinoline수율 73.4%

시약·촉매·용매 1

HCID 6342Acetonitrile용매

반응 조건

온도
65 °C

실험 절차

A reactor was charged sequentially with 6,7-dimethoxy-quinoline-4-ol (1 L, 10.0 kg) and acetonitrile (64.0 L). The resulting mixture was heated to approximately 65° C. and phosphorus oxychloride (POCl3, 50.0 kg) was added. After the addition of POCl3, the temperature of the reaction mixture was raised to approximately 80° C. The reaction was deemed complete (approximately 9.0 hours) when <2% of the starting material remained (in process high-performance liquid chromatography [HPLC] analysis). The reaction mixture was cooled to approximately 10° C. and then quenched into a chilled solution of dichloromethane (DCM, 238.0 kg), 30% NH4OH (135.0 kg), and ice (440.0 kg). The resulting mixture was warmed to approximately 14° C., and phases were separated. The organic phase was washed with water (40.0 kg) and concentrated by vacuum distillation with the removal of solvent (approximately 190.0 kg). Methyl-t-butyl ether (MTBE, 50.0 kg) was added to the batch, and the mixture was cooled to approximately 10° C., during which time the product crystallized out. The solids were recovered by centrifugation, washed with n-heptane (20.0 kg), and dried at approximately 40° C. to afford the title compound (8.0 kg).

후처리

  1. temperaturethe temperature of the reaction mixture was raised to approximately 80° C
  2. temperatureThe reaction mixture was cooled to approximately 10° C.
  3. customquenched into a chilled solution of dichloromethane (DCM, 238.0 kg), 30% NH4OH (135.0 kg), and ice (440.0 kg)
  4. temperatureThe resulting mixture was warmed to approximately 14° C.
  5. customphases were separated
  6. washThe organic phase was washed with water (40.0 kg)
  7. concentrationconcentrated by vacuum distillation with the removal of solvent (approximately 190.0 kg)
  8. additionMethyl-t-butyl ether (MTBE, 50.0 kg) was added to the batch
  9. temperaturethe mixture was cooled to approximately 10° C., during which time the product
  10. customcrystallized out
  11. customThe solids were recovered by centrifugation
  12. washwashed with n-heptane (20.0 kg)
  13. customdried at approximately 40° C.

출처 및 근거

ORD 기록
ord-d83b21da9c4c424f8a970bcfe82e8c35
출처 데이터셋
uspto-grants-2014_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08877776B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트