홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → Ethyl 2-chloro-2-[2-(4-methoxyphenyl)hydrazono]acetate

HRID 335384
인쇄

반응식

HRID 335384 반응식
[CH3:1][O:2][C:3]1[CH:8]=[CH:7][C:6]([NH2:9])=[CH:5][CH:4]=1.Cl.[N:11]([O-])=O.[Na+].[CH2:15]([O:17][C:18](=[O:24])[CH:19]([Cl:23])C(C)=O)[CH3:16].C(O[Na])(C)=O>O.CCOC(C)=O>[CH2:15]([O:17][C:18](=[O:24])[C:19]([Cl:23])=[N:11][NH:9][C:6]1[CH:7]=[CH:8][C:3]([O:2][CH3:1])=[CH:4][CH:5]=1)[CH3:16]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 313Hydrochloric AcidHCID 7732P-AnisidineHCID 11858Ethyl 2-chloroacetoacetateHCID 23668193Sodium NitriteHCID 178418247HCID 178418247, 화합물

생성물 1

HCID 21829645Ethyl 2-chloro-2-[2-(4-methoxyphenyl)hydrazono]acetate

시약·촉매·용매 2

HCID 962
Water
용매
3회
HCID 8857Ethyl Acetate용매

반응 조건

온도
0 °C

실험 절차

p-anisidine (31.02 g, 0.252 mol) in 100 ml of H2O is suspended in a 250 ml 4-necked flask equipped with coolant, thermometer, dropping funnel and magnetic stirrer, and cooled to 0° C. in an ice bath. 60 ml of 37% HCl is added, followed by a solution of NaNO2 (20.95 g, 0.307 mol) in 50 ml of H2O, through a dropping funnel, maintaining the temperature below 5° C. After the addition the mixture is left under stirring at between 0 and 5° C. for 1 h, and the solution obtained is added at 0° C. to a solution containing ethyl-2-chloroacetoacetate (41.65 g, 0.254 mol), AcONa (47.84 g, 0.583 mol), AcOEt (200 ml) and H2O (100 ml). The biphasic system is stirred at between 0 and 5° C. for 1 h, and then at about 25° C. for 16 h. The phases are then separated and the organic phase is washed with a saturated solution of NaHCO3 (4×80 ml), anhydrified on Na2SO4, filtered and evaporated under low pressure. The compound of formula (IV) is obtained as a solid (about 57 g), which is used for the next stage without further purification.

후처리

  1. customequipped with coolant, thermometer,
  2. temperaturemaintaining the temperature below 5° C
  3. additionAfter the addition the mixture
  4. waitis left
  5. customthe solution obtained
  6. additionis added at 0° C. to a solution
  7. stirringThe biphasic system is stirred at between 0 and 5° C. for 1 h
  8. waitat about 25° C. for 16 h
  9. customThe phases are then separated
  10. washthe organic phase is washed with a saturated solution of NaHCO3 (4×80 ml)
  11. filtrationfiltered
  12. customevaporated under low pressure

출처 및 근거

ORD 기록
ord-b23de9985bec45ec933dcdd633b65db0
출처 데이터셋
uspto-grants-2014_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08884016B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트