홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → Methyl 5-nitro-1-benzothiophene-2-carboxylate

HRID 343882
인쇄

반응식

HRID 343882 반응식
[C:1]([O:5][CH3:6])(=[O:4])[CH2:2][SH:3].C[O-].[Na+].Cl[C:11]1[CH:18]=[CH:17][C:16]([N+:19]([O-:21])=[O:20])=[CH:15][C:12]=1[CH:13]=O.Cl>CO>[N+:19]([C:16]1[CH:17]=[CH:18][C:11]2[S:3][C:2]([C:1]([O:5][CH3:6])=[O:4])=[CH:13][C:12]=2[CH:15]=1)([O-:21])=[O:20]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 313Hydrochloric AcidHCID 16907Methyl ThioglycolateHCID 729332-Chloro-5-nitrobenzaldehydeHCID 10942334Sodium Methoxide

생성물 1

HCID 1489057Methyl 5-nitro-1-benzothiophene-2-carboxylate수율 95.2%

시약·촉매·용매 1

HCID 887Methanol
용매
3회

실험 절차

A 2000 ml 3-necked round-bottomed flask, 250 ml pressure equalized dropping funnel, Teflon stirrer, and gas inlet were oven-dried for 12 hours at 160° C. The apparatus was rapidly assembled, fitted with a thermometer, flushed with dry nitrogen gas, and allowed to cool to room temperature. The cooled flask was charged with methanol (600 ml) and methyl thioglycolate (28.6 g, 0.27 mole). Sodium methoxide (19,98 g, 0.37 mole) in methanol (125 ml) was added to the reaction mixture over 10 minutes while stirring. The reaction mixture was then warmed to 40° C. and a solution of 2-chloro-5-nitrobenzaldehyde (28.6 g, 0.27 mole) in methanol (300 ml) was added over a period of about 20 minutes. The resulting slurry was stirred at 40° C. for 1 hour, cooled to room temperature, and acidified with 2M hydrochloric acid. The resulting white solid was filtered, washed with water (2×300 ml) and air-dried to give 61 g (95%) of methyl 5-nitrobenzothiophene-2-carboxylate. See, R. A. Zambias, M. L. Hammond, Synthetic Communications, 21:959 (1991).

후처리

  1. customA 2000 ml 3-necked round-bottomed flask, 250 ml pressure equalized dropping
  2. customfunnel, Teflon stirrer, and gas inlet were oven-dried for 12 hours at 160° C
  3. customfitted with a thermometer
  4. customflushed with dry nitrogen gas
  5. temperatureThe reaction mixture was then warmed to 40° C.
  6. stirringThe resulting slurry was stirred at 40° C. for 1 hour
  7. temperaturecooled to room temperature
  8. filtrationThe resulting white solid was filtered
  9. washwashed with water (2×300 ml)
  10. customair-dried

출처 및 근거

ORD 기록
ord-37e1adc7acfc47afbb21abe9e64153f1
출처 데이터셋
uspto-grants-1999_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05863936

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트