홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → (RS)-3-Ethoxycarbonyl-7,9-difluoro-1-(2-fluoroethyl)-4-oxo-8-(3-phenyl-1-piperazinyl)-1,4-dihydrobenzo[b][1,8]naphthyridine

HRID 344897
인쇄

반응식

HRID 344897 반응식
[CH2:1]([O:3][C:4]([C:6]1[C:7](=[O:26])[C:8]2[CH:9]=[C:10]3[CH:22]=[C:21]([F:23])[C:20](F)=[C:19]([F:25])[C:11]3=[N:12][C:13]=2[N:14]([CH2:16][CH2:17][F:18])[CH:15]=1)=[O:5])[CH3:2].[C:27]1([CH:33]2[CH2:38][NH:37][CH2:36][CH2:35][NH:34]2)[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=1.C(=O)([O-])[O-].[Na+].[Na+].O>CS(C)=O>[CH2:1]([O:3][C:4]([C:6]1[C:7](=[O:26])[C:8]2[CH:9]=[C:10]3[CH:22]=[C:21]([F:23])[C:20]([N:37]4[CH2:36][CH2:35][NH:34][CH:33]([C:27]5[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=5)[CH2:38]4)=[C:19]([F:25])[C:11]3=[N:12][C:13]=2[N:14]([CH2:16][CH2:17][F:18])[CH:15]=1)=[O:5])[CH3:2]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962WaterHCID 10340Sodium CarbonateHCID 2506732-PhenylpiperazineHCID 544541923-Ethoxycarbonyl-1-(2-fluoroethyl)-7,8,9-trifluoro-4-oxo-1,4-dihydrobenzo[b][1,8]naphthyridine

생성물 1

HCID 54321683(RS)-3-Ethoxycarbonyl-7,9-difluoro-1-(2-fluoroethyl)-4-oxo-8-(3-phenyl-1-piperazinyl)-1,4-dihydrobenzo[b][1,8]naphthyridine

시약·촉매·용매 1

HCID 679Dimethyl Sulfoxide용매

반응 조건

온도
100 °C

실험 절차

(RS)-3-Ethoxycarbonyl-7,9-difluoro-1-(2-fluoroethyl)-4-oxo-8-(3-phenyl-1-piperazinyl)-1,4-dihydrobenzo[b][1,8]naphthyridine was prepared under the following conditions: a suspension of 3-ethoxycarbonyl-1-(2-fluoroethyl)-7,8,9-trifluoro-4-oxo-1,4-dihydrobenzo[b][1,8]naphthyridine (2.8 g), (RS)-2-phenylpiperazine (1.7 g) and sodium carbonate (1.1 g) in dimethyl sulphoxide (40 cc) is heated with stirring to a temperature in the region of 100° C. for 2 hours. After cooling to approximately 20° C., the reaction mixture is poured into water (200 cc) and extracted with trichloromethane (3×100 cc). The combined organic extracts are washed with water (1×50 cc) and concentrated under reduced pressure (20 kPa) at a temperature in the region of 40° C. The oily residue is taken up with ethanol (100 cc) and concentrated again under reduced pressure under the above conditions. The solid obtained is recrystallized in ethanol (100 cc) containing dimethylformamide (20%), drained and washed with ethanol (2×20 cc). The expected product (2.4 g) is obtained in the form of a yellow solid, m.p. 208° C.

후처리

  1. temperatureis heated
  2. temperatureAfter cooling to approximately 20° C.
  3. extractionextracted with trichloromethane (3×100 cc)
  4. washThe combined organic extracts are washed with water (1×50 cc)
  5. concentrationconcentrated under reduced pressure (20 kPa) at a temperature in the region of 40° C
  6. concentrationconcentrated again under reduced pressure under the above conditions
  7. customThe solid obtained
  8. customis recrystallized in ethanol (100 cc)
  9. additioncontaining dimethylformamide (20%)
  10. washwashed with ethanol (2×20 cc)

출처 및 근거

ORD 기록
ord-6dce58c6cd3d4aa49046c9fb48a914b4
출처 데이터셋
uspto-grants-1991_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05053509

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트