홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acetone → Methane

HRID 351311
노트
인쇄 미리보기

반응식

HRID 351311 반응식
[NH2:1][C:2]([NH2:4])=[O:3].N[C@H:6](C=O)CCSC.CC(C)=O.NC(N)=O.[Cl-:21].[OH:22][CH2:23][CH2:24][N+:25]([CH3:28])([CH3:27])[CH3:26]>[Cl-].OCC[N+](C)(C)C.[O-2].[Zn+2].[Fe].[Ni].[Ti]>[NH2:1][C:2]([NH2:4])=[O:3].[Cl-:21].[OH:22][CH2:23][CH2:24][N+:25]([CH3:28])([CH3:27])[CH3:26].[CH4:6]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

11

반응물 4

HCID 180AcetoneHCID 1176UreaHCID 446793Methionin ALHCID 17983235Choline chloride urea

생성물 2

HCID 297MethaneHCID 17983235Choline chloride urea

시약·촉매·용매 5

HCID 935Nickel
촉매
HCID 6209Choline Chloride촉매
HCID 23925Iron촉매
HCID 23963Titanium촉매
HCID 3007857Zinc Oxide촉매

반응 조건

온도
80 °C

실험 절차

Zinc oxide and lead compounds can be dissolved in 2:1 urea-choline chloride and the respective metals subsequently electrodeposited onto a suitable cathode. Oxides of Fe, Al, Si and Ca were found to be almost totally insoluble in the above ionic liquid. Urea-choline chloride ionic liquid was prepared by combining urea (0.02 moles) with choline chloride (0.01 moles) in a beaker and heating at 80° C. Arc furnace dust (0.5 g) was added to the resulting clear colourless liquid and the mixture was heated at 80° C. for 1 hour. After 1 hour a brown suspension was obtained which was transferred to an electrochemical cell. Metal electrodeposition was achieved using a nickel cathode and a titanium anode (both electrodes were 50 mm by 10 mm and 1 mm thick) and applying a potential difference of 3.5 V for 1 hour. Prior to electrodeposition the electrodes were gently abraded with glass paper and cleaned with acetone. After 1 hour of electrodeposition the nickel cathode was removed from the brown suspension, washed with acetone and dried. A thick charcoal coloured deposit was obtained. The electrodeposited material was analysed using Energy Dispersive Analysis by X-rays. The results of the analysis revealed the presence of lead (77%), zinc (16%) and copper (7%). There was no trace of iron in the deposit thus showing that zinc oxide and iron (III) oxide can be separated and harmful lead compounds removed from arc furnace dust.

후처리

  1. temperaturethe mixture was heated at 80° C. for 1 hour
  2. customAfter 1 hour a brown suspension was obtained which
  3. customfor 1 hour
  4. customAfter 1 hour of electrodeposition the nickel cathode was removed from the brown suspension
  5. washwashed with acetone
  6. customdried

출처 및 근거

ORD 기록
ord-b0fa3fbc256c4e8ba3ea94c9691e29cd
출처 데이터셋
uspto-grants-2007_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07183433B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트