Hydrochloric Acid → 3-Chloromethyl-4-(4-fluoro-benzoyl)-benzonitrile

HRID 353604

반응식

HRID 353604 반응식
[F:1][C:2]1[CH:7]=[CH:6][C:5]([Mg]Br)=[CH:4][CH:3]=1.[Cl:10][CH2:11][C:12]1[CH:20]=[C:19]([C:21]#[N:22])[CH:18]=[CH:17][C:13]=1[C:14](Cl)=[O:15].Cl>C1(C)C=CC=CC=1>[Cl:10][CH2:11][C:12]1[CH:20]=[C:19]([CH:18]=[CH:17][C:13]=1[C:14](=[O:15])[C:5]1[CH:6]=[CH:7][C:2]([F:1])=[CH:3][CH:4]=1)[C:21]#[N:22]

참가 물질

5

반응물 3

HCID 313Hydrochloric AcidHCID 113449102-(Chloromethyl)-4-cyanobenzoyl chlorideHCID 178418676HCID 178418676, 화합물

생성물 1

HCID 99434343-Chloromethyl-4-(4-fluoro-benzoyl)-benzonitrile수율 90%

시약·촉매·용매 1

HCID 1140Toluene용매

반응 조건

온도
0 °C

실험 절차

A solution of 4-fluoro phenylmagnesium bromide (0.73M in THF, 170 ml) was added to a cooled solution of 2-chloromethyl-4-cyano-benzoyl chloride (25.0 g) in toluene (200 ml) so that the temperature did not raise above 0° C. The mixture was stirred at 0° C. for 2 hours. An aqueous solution of HCl (250 ml) was added and stirring continued for 0.5 hours. The phases were separated and the aqueous phase was extracted with toluene (200 ml). The combined organic phases were washed with saturated NaHCO3 solution (200 ml) and water (100 ml). The solvents were evaporated in vacuo to give a brownish oil (29.0 g, 90%). Spectral and analytical data were in accordance with the example above.

후처리

  1. temperaturedid not raise above 0° C
  2. stirringstirring
  3. waitcontinued for 0.5 hours
  4. customThe phases were separated
  5. extractionthe aqueous phase was extracted with toluene (200 ml)
  6. washThe combined organic phases were washed with saturated NaHCO3 solution (200 ml) and water (100 ml)
  7. customThe solvents were evaporated in vacuo

출처 및 근거

ORD 기록
ord-fe7731d6d3114efab715343d7bc05b64
출처 데이터셋
uspto-grants-2004_06
특허 번호
US06753433B2

연결된 노트

불러오는 중…