홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetic Acid → 2-Acetoxypropionic Acid

HRID 355101
인쇄

반응식

HRID 355101 반응식
[CH:1]1C=CC(P(C2C=CC=CC=2)C2C=CC=CC=2)=CC=1.[C:20]([O:23]C=C)(=[O:22])[CH3:21].[C:26]([OH:29])(=[O:28])[CH3:27]>>[C:26]([O:29][CH:21]([CH3:1])[C:20]([OH:23])=[O:22])(=[O:28])[CH3:27]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 176Acetic AcidHCID 7904Vinyl AcetateHCID 11776Triphenylphosphine

생성물 1

HCID 790412-Acetoxypropionic Acid

반응 조건

온도
150 °C

실험 절차

A 300 ml autoclave is charged with 0.110 g of [(C3H5)PdCl]2 (0.6 mmole Pd), 3.15 g. of Ph3P (12 mmole), 83 ml of acetic acid as solvent, and 37 ml of vinyl acetate (0.4 mole). The autoclave was flushed with nitrogen, pressured to 30 psig with carbon monoxide, and heated to 150° C. After reaching 150° C. one milliliter of water was pumped into the reaction solution from a Jurgenson Gauge and the pressure was raised to 700 psig with carbon monoxide. The reaction began absorbing gas as evidenced by a drop in the autoclave pressure. Therefore the autoclave pressure was maintained at 700 psig by feeding carbon monxide from a high-pressure reservoir. In addition, the water concentration in the reaction solution was maintained by addition of one milliliter of water from the Jurgenson Gauge for every 130 psig pressure drop in the high-pressure reservoir. After the addition of a total of five milliliters of water the reaction had consumed 675 psig of carbon monoxide from the high pressure reservoir. At this time the reaction was terminated. The production of α-acetoxypropionic acid was shown by a nuclear magnetic resonance and gas chromatography of the concentrated reaction solution. Pure α-acetoxypropionic acid was isolated from a subsequent fractional distillation. The mass spectrum of other fractions showed ethylidene diacetate (major), propionic acid (minor), and acrylic acid (minor) to be by-products.

후처리

  1. customThe autoclave was flushed with nitrogen
  2. customAfter reaching 150° C.
  3. temperaturethe pressure was raised to 700 psig with carbon monoxide
  4. customThe reaction began absorbing gas
  5. temperatureTherefore the autoclave pressure was maintained at 700 psig
  6. concentrationIn addition, the water concentration in the reaction solution
  7. temperaturewas maintained by addition of one milliliter of water from the Jurgenson Gauge for every 130 psig pressure drop in the high-pressure reservoir
  8. additionAfter the addition of a total of five milliliters of water the reaction
  9. customhad consumed 675 psig of carbon monoxide from the high pressure reservoir
  10. customAt this time the reaction was terminated
  11. customThe production of α-acetoxypropionic acid was shown by a nuclear magnetic resonance and gas chromatography of the concentrated reaction solution

출처 및 근거

ORD 기록
ord-824278905d824834951cae001c4f469d
출처 데이터셋
uspto-grants-1983_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04377708

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트