홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrogen Sulfide → (3-Mercaptopropyl)trimethoxysilane

HRID 357672
노트
인쇄 미리보기

반응식

HRID 357672 반응식
[SH2:1].Cl[CH2:3][CH2:4][CH2:5][Si:6]([O:11][CH3:12])([O:9][CH3:10])[O:7][CH3:8]>CO>[SH:1][CH2:3][CH2:4][CH2:5][Si:6]([O:11][CH3:12])([O:9][CH3:10])[O:7][CH3:8]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 402Hydrogen Sulfide3회HCID 624493-(Trimethoxysilyl)propyl chloride

생성물 1

HCID 20473(3-Mercaptopropyl)trimethoxysilane수율 93.5%

시약·촉매·용매 1

HCID 887Methanol용매

반응 조건

온도
90 °C

실험 절차

267.6 g of a methanol solution of 22% sodium hydrogensulfide anhydride (1.05 mol) was put into an autoclave with an internal volume of 1 liter and the air was replaced by nitrogen. 0.3 mol of hydrogen sulfide was then blown in and the system was pressurized to 0.9 kgf/cm2 to oversaturate hydrogen sulfide. After heating the system up to 90° C., 198.7 g (1.0 mole) of 3-chloropropyltrimethoxy silane was dripped for 3 hours, and during the dripping, 0.1 mol of hydrogen sulfide was blown into the system so that the pressure in the system was kept at 3.5 kgf/cm2. After the dripping, the system was aged for 2 hour at 90° C., followed by cooling. By-product salts produced in the reaction were filtered away. The composition was analyzed by means of gas chromatography. 3-mercaptopropyltrimethoxy silane was obtained with a yield of 93.5%.

후처리

  1. temperatureby cooling
  2. customBy-product salts produced in the reaction
  3. filtrationwere filtered away

출처 및 근거

ORD 기록
ord-831230018a3848bc86430b5f919e4fbc
출처 데이터셋
uspto-grants-1998_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05840952

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트