홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Heptane → 1-Methyl-3-piperidyl alpha-Ethynyl-alpha-phenylglycolate

HRID 358252
인쇄

반응식

HRID 358252 반응식
[CH3:1][N:2]1[CH2:7][CH2:6][CH2:5][CH:4]([OH:8])[CH2:3]1.[Na].CCCCCCC.[C:17]([C:19]([C:25]1[CH:30]=[CH:29][CH:28]=[CH:27][CH:26]=1)([OH:24])[C:20](OC)=[O:21])#[CH:18]>CO>[C:17]([C:19]([C:25]1[CH:30]=[CH:29][CH:28]=[CH:27][CH:26]=1)([OH:24])[C:20]([O:8][CH:4]1[CH2:5][CH2:6][CH2:7][N:2]([CH3:1])[CH2:3]1)=[O:21])#[CH:18]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 8900HeptaneHCID 980163-Piperidinol, 1-methyl-HCID 5360545SodiumHCID 13371130Methyl alpha-ethynyl-alpha-phenylglycolate

생성물 1

HCID 133711501-Methyl-3-piperidyl alpha-Ethynyl-alpha-phenylglycolate

시약·촉매·용매 1

HCID 887Methanol용매

실험 절차

1-Methyl-3-piperidinol (3.5 g., 0.03 mole) and a small piece of sodium (~0.05 g.) were refluxed in 150 ml. of n-heptane for about 1 hour in a flask equipped with a small distilling head. Methyl α-ethynyl-α-phenylglycolate (4.0 g., 0.02 mole) was then added intermittently over a one hour period with the temperature of the reaction mixture maintained at 90°. The reaction mixture was heated at 90°-95° for three hours during which time very little methanol was collected. The reaction mixture was subsequently refluxed for 11 hours and the azeotrope collected periodically. During this time sodium methoxide (0.075 g.) was added and 50 ml. of fresh n-heptane was added as an equal volume of distillate was collected simultaneously. These operations were carried out twice. Heating was stopped and a total of 0.3 ml. (38% of theory) of methanol was obtained. As the reaction mixture cooled, an oil settled out. The n-heptane was decanted and the residue was washed with ice water (3×10 ml.). Ether and ice were added to the oil and the mixture worked up as described in Example 12, to yield 1.9 g. (35%) of the product as a yellow oil. Crystallization was effected by dissolving the material in ether, adding 30°-60° petroleum ether to produce turbidity and refrigerating the solution for several days. The product melted at 92°-95° after recrystallization from hexane.

후처리

  1. temperaturemaintained at 90°
  2. customwas collected
  3. temperatureThe reaction mixture was subsequently refluxed for 11 hours
  4. customthe azeotrope collected periodically
  5. additionDuring this time sodium methoxide (0.075 g.) was added
  6. additionof fresh n-heptane was added as an equal volume of distillate
  7. customwas collected simultaneously
  8. temperatureHeating
  9. custom(38% of theory) of methanol was obtained
  10. temperatureAs the reaction mixture cooled
  11. customThe n-heptane was decanted
  12. washthe residue was washed with ice water (3×10 ml.)
  13. additionEther and ice were added to the oil
  14. customto yield 1.9 g
  15. customCrystallization
  16. dissolutionby dissolving the material in ether
  17. additionadding 30°-60° petroleum ether
  18. customto produce turbidity
  19. customfor several days
  20. customThe product melted at 92°-95° after recrystallization from hexane

출처 및 근거

ORD 기록
ord-cb0f6994c0da4fceacfffd0808688fa6
출처 데이터셋
uspto-grants-1984_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04465834

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트