홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → N-Phenylacrylamide

HRID 364679
인쇄

반응식

HRID 364679 반응식
[NH2:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.[C:8]([CH:12]1CC2O[CH:13]1C=C2)(OC)=[O:9].Cl>O>[C:2]1([NH:1][C:8](=[O:9])[CH:12]=[CH2:13])[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 313Hydrochloric AcidHCID 6115AnilineHCID 12271748Methyl 7-oxabicyclo[2.2.1]hept-5-ene-2-carboxylate

생성물 1

HCID 221792N-Phenylacrylamide

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
140 °C

실험 절차

7.2 parts 30% methanolic Na-methylate solution are added to 46.5 parts aniline. 77 parts 2-carbomethoxy-7-oxabicyclo(2,2,1)hept-5-ene are added drop-wise at 40° C. The reaction medium is then stirred for 15 hours at this temperature and neutralised with 4 parts concentrated hydrochloric acid. 50 parts water are added, and the organic phase separated off. The organic phase is reduced in a rotary evaporator at a bath temperature of 90° C. and under a vacuum of 20 Torr. The residue is heated in a vacuum of 20 Torr to 110° to 120° C. (bath temperature 140° C.). On conclusion of the furane separation, the sedimentation temperature increases and the product distills over. 27.5 parts N-phenylacrylamide with a boiling point of 135° C. at 0.4 Torr are obtained. The product recrystallised from the acetonitrile at -20° C. has a melting point of 114° to 115° C.

후처리

  1. customthe organic phase separated off
  2. customThe organic phase is reduced in a rotary evaporator at a bath temperature of 90° C.
  3. customOn conclusion of the furane separation
  4. temperaturethe sedimentation temperature increases
  5. distillationthe product distills over

출처 및 근거

ORD 기록
ord-37af189c9f074f43975d0a666e77eed4
출처 데이터셋
uspto-grants-1986_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04605740

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트