Acrylamide → Isooctyl Acrylate Acrylamide Vinyl Acetate

HRID 366965

반응식

HRID 366965 반응식
[C:1]([O:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH:11]([CH3:13])[CH3:12])(=[O:4])[CH:2]=[CH2:3].[C:14]([NH2:18])(=[O:17])[CH:15]=[CH2:16].[C:19]([O:22][CH:23]=[CH2:24])(=[O:21])[CH3:20].N(C(C)(CC)C#N)=NC(C)(CC)C#N>CO.C(OCC)(=O)C>[C:1]([O:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH:11]([CH3:13])[CH3:12])(=[O:4])[CH:2]=[CH2:3].[C:14]([NH2:18])(=[O:17])[CH:15]=[CH2:16].[C:19]([O:22][CH:23]=[CH2:24])(=[O:21])[CH3:20]

참가 물질

7

반응물 4

HCID 6579AcrylamideHCID 7904Vinyl AcetateHCID 930792,2'-Azobis(2-methylbutyronitrile)HCID 165746Isooctyl acrylate

생성물 1

HCID 86608178Isooctyl Acrylate Acrylamide Vinyl Acetate

시약·촉매·용매 2

HCID 887Methanol용매HCID 8857Ethyl Acetate용매

실험 절차

A master batch was prepared by mixing isooctyl acrylate (1233.75 g), acrylamide (118.125 g), vinyl acetate (337.500 g) and 2,2'-azobis(2-methylbutanenitrile) (1.6875 g). A portion (225.475 g) of the master batch, ethyl acetate (257.7) and methanol (28.6 g) were placed in a 1 liter amber bottle. The mixture was deoxygenated by purging with nitrogen (1 L/min) for 2 minutes. The bottle was sealed and placed in a rotating water bath at 57° C. for 24 hours. The bottle was removed, opened, and then charged with ethyl acetate (214.8 g) and methanol (23.8 g). The contents were mixed until uniform (usually overnight). The percent solids of the resulting copolymer solution was 26.4. The inherent viscosity was 1.47 dl/g in ethyl acetate at 0.15 g/dl.

후처리

  1. customA master batch was prepared
  2. customThe mixture was deoxygenated
  3. customby purging with nitrogen (1 L/min) for 2 minutes
  4. customThe bottle was sealed
  5. customThe bottle was removed
  6. additioncharged with ethyl acetate (214.8 g) and methanol (23.8 g)
  7. additionThe contents were mixed until uniform (usually overnight)

출처 및 근거

ORD 기록
ord-b7c1d11cac234d47ab970ff6188f6e54
출처 데이터셋
uspto-grants-2000_10
특허 번호
US06132760

연결된 노트

불러오는 중…