홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Chlorotrimethylsilane → (S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl ester

HRID 369570
인쇄

반응식

HRID 369570 반응식
Cl[Si](C)(C)C.[O:6]1[CH2:10][CH2:9][O:8][CH:7]1[CH2:11][CH2:12][CH2:13][C@H:14]([NH2:18])[C:15]([OH:17])=[O:16].S(OC)(O[CH3:22])=O.C[O-].[K+]>CO.C(OCC)(=O)C>[NH2:18][C@@H:14]([CH2:13][CH2:12][CH2:11][CH:7]([O:8][CH3:9])[O:6][CH3:10])[C:15]([O:17][CH3:22])=[O:16]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 6397ChlorotrimethylsilaneHCID 69223Dimethyl sulfiteHCID 11041524Allysine ethylene acetalHCID 23664618Potassium methoxide

생성물 1

HCID 10130457(S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl ester수율 80.2%

시약·촉매·용매 2

HCID 887Methanol
용매
HCID 8857Ethyl Acetate용매

반응 조건

온도
42.5 °C

실험 절차

Under nitrogen, chlorotrimethyl silane (28.0 g) was added to a slurry of 5-(1,3-dioxolan-2-yl)-(S)-2-amino-pentanoic acid (20.0 g) and dimethyl sulfite (12.0 g) in methanol (240 mL) to afford a homogeneous solution. Following the observation of an exotherm to 29° C., the solution was heated to 40-45° C., stirred at that temperature for 8 h and at ~22° C. for up to 72 hours. In-process HPLC analysis showed that the reaction was complete (~93 M % conversion to product) and the resulting solution was cooled to -5 to -10° C. With stirring, the apparent pH of the mixture was adjusted to 11.7 to 11.9 by the slow careful addition of 32% (or 4.45 M) methanolic potassium methoxide solution (70 mL) maintaining the temperature in the range -5 to 0° C. Analysis of the product slurry (NMR) indicated that the neutralization was complete (chemical shift of the alpha proton of BMS-205787 was<3.36 ppm). The solvent of the product slurry was exchanged with ethyl acetate by first concentrating the thin slurry under vacuum at<30° C. to 300 mL volume followed by the addition of ethyl acetate until the removal of methanol was completed as judged by in-process GC analysis (<1 AP). Upon completion of the solvent exchange, the batch volume was adjusted to ~400 mL with ethyl acetate and the resulting slurry was filtered. Poly(acrylic acid co-acrylamide), potassium salt (3.0 to 3.2 g) and water (30-32 mL) were added to the filtrate. The mixture was stirred for ~35 minutes and filtered. Optionally, the Poly(acrylic acid co-acrylamide), potassium salt treatment can be repeated on the filtrate if the quantity of ethylene glycol exceeds 0.15 equivalents, as judged by in-process GC analysis. Following in-process HPLC analysis, (S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl ester (17.4 g) was obtained as an ethyl acetate solution in 80.8 M % yield.

후처리

  1. customto afford a homogeneous solution
  2. customto 29° C.
  3. temperaturethe resulting solution was cooled to -5 to -10° C
  4. stirringWith stirring
  5. temperaturemaintaining the temperature in the range -5 to 0° C
  6. concentrationby first concentrating the thin slurry under vacuum at<30° C. to 300 mL volume
  7. additionfollowed by the addition of ethyl acetate until the removal of methanol
  8. filtrationthe resulting slurry was filtered
  9. additionPoly(acrylic acid co-acrylamide), potassium salt (3.0 to 3.2 g) and water (30-32 mL) were added to the filtrate
  10. stirringThe mixture was stirred for ~35 minutes
  11. filtrationfiltered

출처 및 근거

ORD 기록
ord-3ed90943271149369fe9a7cbcb00fd16
출처 데이터셋
uspto-grants-2000_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06140088

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트