홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Acetic Anhydride → 1-methyl-2-(2-(3-methyl-2-thienyl)ethenyl)1H-imidazole

HRID 371713
인쇄

반응식

HRID 371713 반응식
[CH3:1][N:2]1[CH:6]=[CH:5][N:4]=[C:3]1[CH3:7].[CH3:8][C:9]1[CH:13]=[CH:12][S:11][C:10]=1[CH:14]=O.C(OC(=O)C)(=O)C>C(O)(C)C>[CH3:1][N:2]1[CH:6]=[CH:5][N:4]=[C:3]1[CH:7]=[CH:14][C:10]1[S:11][CH:12]=[CH:13][C:9]=1[CH3:8]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 7918Acetic AnhydrideHCID 156171,2-DimethylimidazoleHCID 799113-Methyl-2-thiophenecarboxaldehyde

생성물 1

HCID 536424051-methyl-2-(2-(3-methyl-2-thienyl)ethenyl)1H-imidazole수율 41.2%

시약·촉매·용매 1

HCID 3776Isopropanol용매

실험 절차

A mixture was prepared by admixing together in a 1.0 liter-3-necked round bottomed flask 144.0 grams (1.5 moles) of 1,2-dimethylimidazole, 189.3 grams (1.5 moles) of 3-methyl-2-thiophenecarboxaldehyde and 450 cubic centimeters (cc) of acetic anhydride. The flask was equipped with a stirrer, thermometer and a 12 foot distillation column. The mixture was stirred and heated at ~150° C. for ~2 hours. The temperature increased to ~160° C. At this time 250 cc of the distillate (mostly acetic acid by-product and acetic anhydride) had been collected. An additional 250 cc of acetic anhydride was added to the reaction flash and the heating continued until the temperature again rose to ~160° C. At this time about 320 cc of the distillate had been collected. The reaction mixture in the flask was thereafter concentrated under vacuum giving a residue of 427.0 grams. This residue was mixed with 500 cc of isopropyl alcohol and the resulting dark colored solution concentrated under vacuum giving a residue of 410 grams. This residue was distilled under reduced pressure. The first fraction (124 grams, boiling at 72°-76° C/0.2-0.4 millimeters of mercury (mm)) consisted mainly of starting material. The main fraction, which was the free base of the desired compound was collected in a yield of 155 grams and boiled at 172°-174° C/0.6 mm. The thick tarry pot residue weighed 115 grams. The main fraction was mixed with 150 cc of ethanol and 150 cc of concentrated hydrochloric acid. The insoluble yellow crystals which formed were filtered, washed with ~1.0 liter of ethanol and dried to give 126.3 grams of 1-methyl-2-(2-(3-methyl-2-thienyl)ethenyl)1H-imidazole:monohydrochloride, (Compound I) melting at 287°-288° C. The product was recovered in a yield of 34.9 percent of theoretical.

후처리

  1. customA mixture was prepared
  2. customThe flask was equipped with a stirrer
  3. distillationthermometer and a 12 foot distillation column
  4. temperatureheated at ~150° C. for ~2 hours
  5. temperatureThe temperature increased to ~160° C
  6. distillationAt this time 250 cc of the distillate (mostly acetic acid by-product and acetic anhydride) had been collected
  7. additionAn additional 250 cc of acetic anhydride was added to the reaction flash
  8. customagain rose to ~160° C
  9. distillationAt this time about 320 cc of the distillate had been collected
  10. concentrationThe reaction mixture in the flask was thereafter concentrated under vacuum
  11. customgiving a residue of 427.0 grams
  12. concentrationthe resulting dark colored solution concentrated under vacuum
  13. customgiving a residue of 410 grams
  14. distillationThis residue was distilled under reduced pressure
  15. customwas collected in a yield of 155 grams and boiled at 172°-174° C/0.6 mm
  16. additionThe main fraction was mixed with 150 cc of ethanol and 150 cc of concentrated hydrochloric acid
  17. customThe insoluble yellow crystals which formed
  18. filtrationwere filtered
  19. washwashed with ~1.0 liter of ethanol
  20. customdried

출처 및 근거

ORD 기록
ord-06e278a056fd4c94b42806c52024a049
출처 데이터셋
uspto-grants-1978_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04087536

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트