홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → 1-[(2,2-Dichloroethenyl)oxy]-3-methylbenzene

HRID 372470
인쇄

반응식

HRID 372470 반응식
C(O[CH:5]([O:10][C:11]1[CH:12]=[C:13]([CH3:17])[CH:14]=[CH:15][CH:16]=1)[C:6](Cl)([Cl:8])[Cl:7])(=O)C.S(=O)(=O)(O)O.[OH-].[Na+]>CO>[Cl:7][C:6]([Cl:8])=[CH:5][O:10][C:11]1[CH:12]=[C:13]([CH3:17])[CH:14]=[CH:15][CH:16]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 1118Sulfuric AcidHCID 14798Sodium HydroxideHCID 205689273-(2,2,2-Trichloro-1-acetoxy-ethoxy)-toluene

생성물 1

HCID 205689261-[(2,2-Dichloroethenyl)oxy]-3-methylbenzene

시약·촉매·용매 1

HCID 887Methanol용매

반응 조건

온도
15 °C

실험 절차

By an electrochemical reductive dehydrohalogenation method. 1(3-tolyloxy)-2,2,2-trichloroethyl acetate (15.8 g), concentrated sulphuric acid (98% w/v, 9.8 g) and methanol (220 ml) was charged into an electrolytic cell, which was surrounded by a cooling bath set to maintain the temperature at about 15° C, and fitted with a cylindrical diaphragm, stirrer, reference electrode (SCE) and a working electrode. The cathode was a lead plate (surface area about 40 cm2). Using a current density in the range 5 to 10 mA/cm2 the reaction was conducted in the potential range -1100 to 1700 mV (SCE). When reduction was completed the cathodic electrolyte was neutralised with caustic soda and extracted with methylene chloride, the extracts dried over anhydrous sodium sulphate and evaporated to yield a residue of crude 3-tolyl 2,2-dichlorovinyl ether.

후처리

  1. customwas surrounded by a cooling bath
  2. customfitted with a cylindrical diaphragm, stirrer, reference electrode (SCE)
  3. extractionextracted with methylene chloride
  4. dry with materialthe extracts dried over anhydrous sodium sulphate
  5. customevaporated

출처 및 근거

ORD 기록
ord-77d7be18253d4d49a373caa8ec5609b6
출처 데이터셋
uspto-grants-1978_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04091110

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트