홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Epichlorohydrin → Oxirane, 2-[[(6-methylheptyl)oxy]methyl]-

HRID 373335
인쇄

반응식

HRID 373335 반응식
[CH2:1]([OH:9])[CH2:2][CH2:3][CH2:4][CH2:5][CH:6]([CH3:8])[CH3:7].[CH2:10]([CH:12]1[O:14][CH2:13]1)Cl.[OH-].[Na+]>O.O.Cl[Sn]Cl.C1OCCOCCOCCOCCOCCOC1>[CH2:10]([O:9][CH2:1][CH2:2][CH2:3][CH2:4][CH2:5][CH:6]([CH3:8])[CH3:7])[CH:12]1[O:14][CH2:13]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 7835EpichlorohydrinHCID 14798Sodium HydroxideHCID 15450Isooctan-1-ol

생성물 1

HCID 22571168Oxirane, 2-[[(6-methylheptyl)oxy]methyl]-수율 90%

시약·촉매·용매 2

HCID 2855718-Crown-6촉매HCID 61436Stannous chloride dihydrate촉매

반응 조건

온도
130 °C

실험 절차

A reactor equipped with stirrer, reflux condenser, dropping funnel and thermometer is charged with 130.23 g (1.0 mol) of isooctanol (mixture of isomers), 4.51 g (0.02 mol) of SnCl2.2H2O and 5.28 g (0.02 mol) of 18-crown-6 (crown ether) and the charge is heated to 130° C. Then, with efficient stirring, 86.26 ml (1.1 mol) of epichlorohydrin are added over 30 minutes. The reaction is allowed to continue for 20 hours, during which time the temperature rises to about 135° C. The reaction mixture is cooled to 55° C. and then, at this temperature, 88 g (1.1 mol) of a 50% solution of sodium hydroxide are added dropwise with efficient stirring over 30 minutes. After stirring for 5 hours at 55°-60° C. and cooling to room temperature, the suspension is filtered and the filtrate is washed with ethyl acetate. The phases are separated, and the aqueous phase is extracted with 2×100 ml of ethyl acetate. The combined organic phases are washed with as small an amount of 10% KH2PO4 solution as possible and then with water until neutral, dried over magnesium sulfate and filtered. The filtrate is freed from solvent on a rotary evaporator under vacuum (bath temperature 50° C.). Yield: 167.4 g (90% of theory) of yellowish isooctanol glycidyl ether (mixture of isomers) for which the following analytical values are obtained: epoxy value: 3.93 eq/kg (73% of theory); total chlorine content: 2.44%; hydrolysable chlorine content: 232 ppm.

후처리

  1. customA reactor equipped with stirrer
  2. temperaturereflux condenser
  3. customrises to about 135° C
  4. temperatureThe reaction mixture is cooled to 55° C.
  5. stirringAfter stirring for 5 hours at 55°-60° C.
  6. temperaturecooling to room temperature
  7. filtrationthe suspension is filtered
  8. washthe filtrate is washed with ethyl acetate
  9. customThe phases are separated
  10. extractionthe aqueous phase is extracted with 2×100 ml of ethyl acetate
  11. washThe combined organic phases are washed with as small an amount of 10% KH2PO4 solution as possible and then with water until neutral,
  12. dry with materialdried over magnesium sulfate
  13. filtrationfiltered
  14. customThe filtrate is freed from solvent on a rotary evaporator under vacuum (bath temperature 50° C.)

출처 및 근거

ORD 기록
ord-898ed2a86cef4afda796d1d682937583
출처 데이터셋
uspto-grants-1992_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05162547

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트