홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Phenylacetyl chloride → (4aRS,7aRS)-6-phenylacetyl-4,4-diphenylperhydrothiopyrano[2,3-c]pyrrole

HRID 375491
인쇄

반응식

HRID 375491 반응식
[C:1]1([CH2:7][C:8](Cl)=[O:9])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.Cl.[C:12]1([C:18]2([C:27]3[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=3)[CH:26]3[CH:22]([CH2:23][NH:24][CH2:25]3)[S:21][CH2:20][CH2:19]2)[CH:17]=[CH:16][CH:15]=[CH:14][CH:13]=1.C(N(CC)CC)C>ClCCl>[C:1]1([CH2:7][C:8]([N:24]2[CH2:25][CH:26]3[C:18]([C:12]4[CH:17]=[CH:16][CH:15]=[CH:14][CH:13]=4)([C:27]4[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=4)[CH2:19][CH2:20][S:21][CH:22]3[CH2:23]2)=[O:9])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 7679Phenylacetyl chlorideHCID 8471TriethylamineHCID 67745331(4aRS,7aRS)4,4-diphenylperhydrothiopyrano[2,3-c]pyrrole hydrochloride

생성물 1

HCID 67745329(4aRS,7aRS)-6-phenylacetyl-4,4-diphenylperhydrothiopyrano[2,3-c]pyrrole

시약·촉매·용매 1

HCID 6344Dichloromethane용매3회

반응 조건

온도
20 °C

실험 절차

A solution of 1.15 cm3 of phenylacetyl chloride in 25 cm3 of dichloromethane is added over 5 minutes to a solution, cooled to 0° C., of 2.63 g of (4aRS,7aRS)-4,4-diphenylperhydrothiopyrano[2,3-c]pyrrole hydrochloride and 2.42 cm3 of triethylamine in 25 cm3 of dichloromethane. After stirring for one hour at 0° C. and one hour at 20° C. 20 cm3 of dichloromethane are added. The reaction mixture is washed twice with 100 cm3 of distilled water, dried over magnesium sulphate and then concentrated to dryness under reduced pressure (2.7 kPa). The oil obtained is chromatographed on a silica gel column (0.04-0.06 mm, diameter 3.5 cm, height 26 cm), eluting under a nitrogen pressure of 0.4 bar with a cyclohexane and ethyl acetate mixture (80/20 by volume) and collecting fractions of 125 cm3. Fractions 19 to 26 are pooled and concentrated to dryness under reduced pressure (2.7 kPa). 0.87 g of (4aRS,7aRS)-6-phenylacetyl-4,4-diphenylperhydrothiopyrano[2,3-c]pyrrole is obtained in the form of a white solid; melting point 210° C.

후처리

  1. washThe reaction mixture is washed twice with 100 cm3 of distilled water
  2. dry with materialdried over magnesium sulphate
  3. concentrationconcentrated to dryness under reduced pressure (2.7 kPa)
  4. customThe oil obtained
  5. customis chromatographed on a silica gel column (0.04-0.06 mm, diameter 3.5 cm, height 26 cm)
  6. washeluting under a nitrogen pressure of 0.4 bar with a cyclohexane and ethyl acetate mixture (80/20 by volume)
  7. customcollecting fractions of 125 cm3
  8. concentrationconcentrated to dryness under reduced pressure (2.7 kPa)

출처 및 근거

ORD 기록
ord-91899b1311aa4244949fdaa59b28a98c
출처 데이터셋
uspto-grants-1996_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05484942

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트