홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → 3-Butenylbenzene

HRID 377134
인쇄

반응식

HRID 377134 반응식
[C:1]1([Na])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[Na].Cl[C:10]1[CH:15]=CC=[CH:12][CH:11]=1.C(Cl)C=C.S(=O)(=O)(O)O>C1(C)C=CC=CC=1.C(NC(C)C)(C)C>[C:1]1([CH2:12][CH2:11][CH:10]=[CH2:15])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 1118Sulfuric AcidHCID 7850Allyl chlorideHCID 7964ChlorobenzeneHCID 5360545SodiumHCID 178507079HCID 178507079, 화합물

생성물 1

HCID 130333-Butenylbenzene수율 87.5%

시약·촉매·용매 2

HCID 7912
Diisopropylamine
촉매
HCID 1140Toluene용매3회

반응 조건

온도
20 °C

실험 절차

A toluene (20 g) solution containing 2.58 g (0.025 mol, 2 mol %) of diisopropylamine was added to phenyl sodium, which had been prepared by reacting 60.0 g (2.610 mol) of sodium dispersion and 144.0 g (1.279 mol) of chlorobenzene in 800 g of toluene, at room temperature (about 20° C.), and then the reaction mixture was stirred for 2 hours. To the resultant greenish brown slurry was added a toluene (40 g) solution containing 98.0 g (1.280 mol) of allyl chloride, keeping the reaction temperature in the range of from -10° C. to 0° C., and then the reaction mixture was allowed to stand, for aging, for 1 hour at room temperature. After the reaction was completed, the reaction mixture was subjected to hydrolysis with 250 ml of sulfuric acid (5%) in the range of 5 to 20° C., and then the resultant solution was allowed to stand, then it was separated. The separated organic layer was washed with 200 ml of water twice, followed by gas chromatography analysis. It was identified that 4-phenyl-1-butene was given, at the yield of 96.4%. Further, the organic layer was condensed by atomospheric distillation, and the residue was further subjected to distillation under reduced pressure at 106° C./105 mmHg, to give 148.0 g of 4-phenyl-1-butene (1.119 mol, yield 87.5% on the basis of chlorobenzene. The term "yield" is hereinafter used in the same meaning as the above), followed by gas chromatography, for purity testing. As a result, it was found that the purity of 4-phenyl-1-butene was 98.7%.

후처리

  1. customhad been prepared
  2. customof from -10° C. to 0° C.
  3. waitfor aging, for 1 hour at room temperature
  4. customit was separated
  5. washThe separated organic layer was washed with 200 ml of water twice
  6. customcondensed
  7. distillationby atomospheric distillation
  8. distillationthe residue was further subjected to distillation under reduced pressure at 106° C./105 mmHg

출처 및 근거

ORD 기록
ord-0f4901cf5ca246658a170561cbc81d47
출처 데이터셋
uspto-grants-2000_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06024897

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트