홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methanesulfonic Acid → Methyl 2-[2-(tetrahydropyran-2-yloxy)-phenyl]-3-fluoromethoxy-acrylate

HRID 378656
인쇄

반응식

HRID 378656 반응식
[H-].[Na+].[O:3]1[CH2:8][CH2:7][CH2:6][CH2:5][CH:4]1[O:9][C:10]1[CH:15]=[CH:14][CH:13]=[CH:12][C:11]=1[C:16](=[CH2:21])[C:17]([O:19][CH3:20])=[O:18].C([O:24][CH3:25])=O.CS(O)(=O)=O.C(=O)([O-])[O-].[K+].[K+].BrC[F:39]>CN(C)C=O>[O:3]1[CH2:8][CH2:7][CH2:6][CH2:5][CH:4]1[O:9][C:10]1[CH:15]=[CH:14][CH:13]=[CH:12][C:11]=1[C:16](=[CH:21][O:24][CH2:25][F:39])[C:17]([O:19][CH3:20])=[O:18]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 6

HCID 6395Methanesulfonic AcidHCID 7865Methyl formateHCID 11430Potassium CarbonateHCID 24758Sodium hydrideHCID 61108BromofluoromethaneHCID 18328184Methyl 2-[2-(tetrahydropyran-2-yloxy)phenyl]-acrylate

생성물 1

HCID 53774316
Methyl 2-[2-(tetrahydropyran-2-yloxy)-phenyl]-3-fluoromethoxy-acrylate
수율 75%

시약·촉매·용매 1

HCID 6228Dimethylformamide용매

반응 조건

온도
2.5 °C

실험 절차

1.5 g of 80% strength sodium hydride in mineral oil are added in portions at 20° C. with stirring to a solution of 12.5 g (60 mmol) of methyl 2-[2-(tetrahydropyran-2-yloxy)-phenyl]-acrylate and 30 g of methyl formate in 150 ml of dry dimethylformamide in a three-necked flask having an attached condenser. After approximately one hour, the exothermic reaction commences with foaming. The temperature is kept at 40° C. for 3 hours. The mixture is cooled to 0-5° C. and treated successively with 4.8 g (0.05 mol) of methanesulphonic acid and in portions with 13.8 g (0.1 mol) of potassium carbonate. The temperature of the cooling fluid in the condenser, as well as the temperature of the reaction mixture, is then adjusted to 0° C. Using a syringe, 6.8 g (0.06 mol) of bromofluoromethane are added and the mixture is stirred overnight at 0-5° C. The reaction mixture is stirred for a further 24 hours without cooling. The temperature of the cooling fluid is kept at approximately 0° C. The mixture is concentrated, the residue is taken up using ethyl acetate, the solution is washed with water, and the organic phase is dried over sodium sulphate and concentrated again. The residue is chromatographed on silica gel using hexane/acetone (7:3). 11.6 g (75% of theory) of methyl 2-[2-(tetrahydropyran-2-yloxy)-phenyl]-3-fluoromethoxy-acrylate are obtained.

후처리

  1. customthe exothermic reaction commences with foaming
  2. waitThe temperature is kept at 40° C. for 3 hours
  3. customis then adjusted to 0° C
  4. stirringThe reaction mixture is stirred for a further 24 hours
  5. temperaturewithout cooling
  6. customis kept at approximately 0° C
  7. concentrationThe mixture is concentrated
  8. washthe solution is washed with water
  9. dry with materialthe organic phase is dried over sodium sulphate
  10. concentrationconcentrated again
  11. customThe residue is chromatographed on silica gel

출처 및 근거

ORD 기록
ord-a1a8a350e10844c4ae6d1bad7bb1a436
출처 데이터셋
uspto-grants-2000_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06031107

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트