홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Styrene → Isobutylene styrene

HRID 394818
인쇄

반응식

HRID 394818 반응식
[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1>O>[CH3:4][C:3](=[CH2:2])[CH3:8].[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 7501Styrene

생성물 1

HCID 44154101Isobutylene styrene

시약·촉매·용매 1

HCID 962Water용매

실험 절차

The polymerizable monomer component and polymerization initiator were charged into the storage tank 21, the catalyst was charged into the storage 22, and the electron donor was charged into the storage tank 33, in the respective proportions shown in Table 12. The reaction solution obtained at the outlet of the tubular reactor 26 in the same manner as in Example 1 was once allowed to reside in the cushioning vessel 30, then in the stirring vessel reactor 35, the second polymerizable monomer component styrene was added in an amount of 290 moles per mole of p-DCC and the reaction was carried out batchwise at −65° C. for 3 hours. The reaction solution was admixed with water for catalyst deactivation and washed with water and then the solvent was removed to give an isobutylene-styrene block copolymer. The molecular weight distribution peak (Mp) and distribution (Mw/Mn) of the polymer were determined by the GPC method. The analytical values for the polymer at the outlet of the reactor 26 (150 minutes after the start of the feeding) and the analytical values for the polymer at the outlet of the reactor 35 were as shown in Table 13. The conversion rate of the monomer component on the occasion of feeding the reaction solution from the reactor 25 to the reactor 26 was 65% by weight.

후처리

  1. customThe polymerizable monomer component and polymerization initiator
  2. additionwere charged into the storage tank 21
  3. additionthe catalyst was charged into the storage 22
  4. additionthe electron donor was charged into the storage tank 33, in the respective proportions
  5. customThe reaction solution obtained at the outlet of the tubular reactor 26 in the same manner as in Example 1
  6. washwashed with water
  7. customthe solvent was removed

출처 및 근거

ORD 기록
ord-6eb0782a42ab40068f542e63b863cb32
출처 데이터셋
uspto-grants-2003_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06602965B1

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트