홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → Halauxifen-methyl

HRID 406458
인쇄

반응식

HRID 406458 반응식
C([NH:4][C:5]1[CH:10]=[C:9]([C:11]2[CH:16]=[CH:15][C:14]([Cl:17])=[C:13]([O:18][CH3:19])[C:12]=2[F:20])[N:8]=[C:7]([C:21]([O:23][CH3:24])=[O:22])[C:6]=1[Cl:25])(=O)C.Cl.C(=O)([O-])[O-].[K+].[K+]>CO>[NH2:4][C:5]1[CH:10]=[C:9]([C:11]2[CH:16]=[CH:15][C:14]([Cl:17])=[C:13]([O:18][CH3:19])[C:12]=2[F:20])[N:8]=[C:7]([C:21]([O:23][CH3:24])=[O:22])[C:6]=1[Cl:25]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 313Hydrochloric Acid4회HCID 11430Potassium CarbonateHCID 67210962Methyl 4-(acetylamino)-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)pyridine-2-carboxylate

생성물 1

HCID 16656802Halauxifen-methyl수율 87%

시약·촉매·용매 1

HCID 887Methanol용매

반응 조건

온도
50 °C

실험 절차

To the slurry of methyl 4-(acetylamino)-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)pyridine-2-carboxylate (prepared as described in Example 5) was added 144 ml of methanol at 25° C. To this slurry was sparged 6.0 g (1.3 equivalents) of anhydrous HCl and the slurry was heated to 50° C. for between 4 hours and 5 hours. The solution was sampled and analyzed by GC to determine reaction completion. The reaction time is dependent on the equivalents of anhydrous HCl employed in the reaction. Using larger excesses of HCl, such as above 1.3 equivalents of HCl, results in shorter reaction times. However, increased volumes of base are subsequently required in the neutralization/work-up to neutralize the excess acid. The reaction mixture was cooled to 25° C. and 127.1 g of a 10% potassium carbonate solution was slowly added until a pH of 7.95 was reached. The organic and aqueous phases were separated and the organic (top) phase was transferred to a 1-L reactor. A total of 140 ml of a saturated sodium chloride solution was added and the mixture was stirred for several minutes. The organic and aqueous phases were separated and the organic (top) phase was transferred to a 1-L reactor equipped with a mechanical stirrer, distillation head, temperature probe, and vacuum capability. The organic phase was concentrated via a vacuum distillation to about a 30% by weight solution. To the solution at 70° C. was added 662.8 g of heptane over 45 minutes. After adding about half of the heptane; a product began to precipitate from solution. The minimum temperature during the heptane addition was 65° C. Upon completion of the heptane addition, the slurry was cooled to about 5° C. The product was collected by filtration and washed with 195 ml of heptane. The product was dried in a vacuum oven at 55° C. overnight to give 87%-90% yield (based on AcAP-Me) of methyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)pyridine-2-carboxylate.

후처리

  1. aliquotThe solution was sampled
  2. customreaction completion
  3. customemployed in the reaction
  4. customresults in shorter reaction times
  5. temperatureHowever, increased volumes of base
  6. temperatureThe reaction mixture was cooled to 25° C.
  7. customThe organic and aqueous phases were separated
  8. customthe organic (top) phase was transferred to a 1-L reactor
  9. additionA total of 140 ml of a saturated sodium chloride solution was added
  10. customThe organic and aqueous phases were separated
  11. customthe organic (top) phase was transferred to a 1-L reactor
  12. customequipped with a mechanical stirrer
  13. distillationdistillation head, temperature probe, and vacuum capability
  14. concentrationThe organic phase was concentrated via a vacuum distillation to about a 30% by weight solution
  15. additionTo the solution at 70° C. was added 662.8 g of heptane over 45 minutes
  16. additionAfter adding about half of the heptane
  17. customto precipitate from solution
  18. additionThe minimum temperature during the heptane addition
  19. customwas 65° C
  20. additionUpon completion of the heptane addition
  21. temperaturethe slurry was cooled to about 5° C
  22. filtrationThe product was collected by filtration
  23. washwashed with 195 ml of heptane
  24. customThe product was dried in a vacuum oven at 55° C. overnight

출처 및 근거

ORD 기록
ord-0033a76dfac349aca8571476994a086f
출처 데이터셋
uspto-grants-2014_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08754110B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트