홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Chloride → 3-(2-Chloro-6,7-dimethoxyquinazolin-4-yl)phenylamine

HRID 41491
인쇄

반응식

HRID 41491 반응식
C(=O)([O-])[O-].[Na+].[Na+].O.[NH2:8][C:9]1[CH:10]=[C:11](B(O)O)[CH:12]=[CH:13][CH:14]=1.[Cl:18][C:19]1[N:28]=[C:27](Cl)[C:26]2[C:21](=[CH:22][C:23]([O:32][CH3:33])=[C:24]([O:30][CH3:31])[CH:25]=2)[N:20]=1.[Cl-].[Na+]>O1CCCC1.Cl[Pd]Cl.C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1.O>[Cl:18][C:19]1[N:28]=[C:27]([C:13]2[CH:14]=[C:9]([NH2:8])[CH:10]=[CH:11][CH:12]=2)[C:26]2[C:21](=[CH:22][C:23]([O:32][CH3:33])=[C:24]([O:30][CH3:31])[CH:25]=2)[N:20]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 4

HCID 5234Sodium ChlorideHCID 10340Sodium CarbonateHCID 5203272,4-Dichloro-6,7-dimethoxyquinazolineHCID 143894233-Aminophenylboronic acid monohydrate

생성물 1

HCID 576095393-(2-Chloro-6,7-dimethoxyquinazolin-4-yl)phenylamine수율 99.7%

시약·촉매·용매 4

HCID 11776
Triphenylphosphine
촉매
HCID 24290Palladium Chloride촉매
HCID 962Water용매
HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
25 °C

실험 절차

To 634 g of sodium carbonate (5.98 mol) was added 2.91 kg of water under a nitrogen atmosphere, followed by stirring for dissolution. To the solution were added 3.0 L of tetrahydrofuran, 431 g of 3-aminophenyl boronic acid monohydrate (2.78 mol), 30.4 g of triphenylphosphine (0.116 mol) and 26.0 g of dichloropalladium (0.116 mol) in this order. To the mixture was dropwise added a solution of 2,4-dichloro-6,7-dimethoxyquinazoline (600 g; 2.32 mol) in tetrahydrofuran (12.0 L) over 2 hours while stirring at 60° C., followed by stirring at the same temperature for 16 hours. To the mixture were added 3.0 kg of a 5% sodium chloride solution and 12.0 L of tetrahydrofuran in this order, and the mixture was stirred at 50° C. for 1 hour and allowed to cool down to 25° C. The mixture was filtered through celite to remove the insoluble matter, and the filtrate was transferred to separatory funnel and the organic layer was separated. To the organic layer were added 150 g of anhydrous magnesium sulfate and 60.0 g of activated carbon, and the mixture was stirred at 50° C. for 1 hour and allowed to cool down to 25° C. The mixture was filtered through celite to remove the insoluble matter, and the filtrate was concentrated under reduced pressure. To the residue was added 6.0 L of water, and the mixture was stirred at room temperature for 1 hour. The precipitated crystals were filtered, and the crystals were dried at 50° C. under reduced pressure to yield 730 g of a target product. Yield: 62.1%

후처리

  1. stirringwhile stirring at 60° C.
  2. stirringby stirring at the same temperature for 16 hours
  3. stirringthe mixture was stirred at 50° C. for 1 hour
  4. filtrationThe mixture was filtered through celite
  5. customto remove the insoluble matter
  6. customthe filtrate was transferred to separatory funnel
  7. customthe organic layer was separated
  8. additionTo the organic layer were added 150 g of anhydrous magnesium sulfate and 60.0 g of activated carbon
  9. stirringthe mixture was stirred at 50° C. for 1 hour
  10. temperatureto cool down to 25° C
  11. filtrationThe mixture was filtered through celite
  12. customto remove the insoluble matter
  13. concentrationthe filtrate was concentrated under reduced pressure
  14. additionTo the residue was added 6.0 L of water
  15. stirringthe mixture was stirred at room temperature for 1 hour
  16. filtrationThe precipitated crystals were filtered
  17. customthe crystals were dried at 50° C. under reduced pressure

출처 및 근거

ORD 기록
ord-0e54c180fe5542ff8936b77f22a1b8ab
출처 데이터셋
uspto-grants-2013_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08530654B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트