홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.2
  1. 홈
  2. /반응

Sodium Cyanide → Ethyl (3R)-4-cyano-3-hydroxybutanoate

HRID 41849
인쇄

반응식

HRID 41849 반응식
[C-:1]#[N:2].[Na+].Cl[CH2:5][C@@H:6]([OH:13])[CH2:7][C:8]([O:10][CH2:11][CH3:12])=[O:9].[OH-].[Na+]>O>[C:1]([CH2:5][C@@H:6]([OH:13])[CH2:7][C:8]([O:10][CH2:11][CH3:12])=[O:9])#[N:2]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 8929Sodium CyanideHCID 14798Sodium HydroxideHCID 7019277Ethyl (3S)-4-chloro-3-hydroxybutanoate

생성물 1

HCID 2733879Ethyl (3R)-4-cyano-3-hydroxybutanoate수율 67.1%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
60 °C

실험 절차

To a 3-necked jacketed 3 L flask equipped with a mechanical stirrer and connected to an automatic titrater by a pH electrode and a feeding tube for addition of base, was charged H20 (1200 mL), NaCN (37.25 g) and NaH2PO4 (125 g) to bring the solution to pH 7. The water circulator was set to 40° C. After 10 minutes, halohydrin dehalogenase SEQ ID NO: 32 as cell lysate (250 mL) was added. The reaction mixture was allowed to stir for 5 minutes. Using an addition funnel, ethyl(S)-4-chloro-3-hydroxybutyrate (45 g) was slowly added over 1 hour. The pH was maintained at 7 by the automatic titrater by the addition of 10 M NaOH (27 mL) over 17 hours. Subsequently, gas chromatography of a reaction sample showed complete conversion to product. Celite (16 g) was added to the flask, which was then connected to a diaphragm pump, whose exhaust is bubbled into 5M NaOH (200 mL), to remove HCN. The mixture was heated to 60° C. under 100 mm Hg pressure. After 1 hour, a submerged air bubbler was added to the solution to aid the removal of the HCN. After 3 hours, an HCN detector indicated less than 5 ppm HCN in the off-gas. The mixture was allowed to cool to room temperature, then filtered through a celite pad. The filtrate was extracted with butyl acetate (3×800 mL) and the combined organic layers filtered through a pad of activated charcoal. The solvent was removed under vacuum by rotary evaporation to provide 28.5 g of ethyl(R)-4-cyano-3-hydroxybutyrate. The purity was 98% (w/w) by HPLC and the enantiomeric excess was >99% (by chiral GC, the S enantiomer was undetectable). As used herein, the term “enantiomeric excess” or “e.e.” refers to the absolute difference between the mole or weight fractions of major (F(+)) and minor (F(−)) enantiomers (i.e., |F(+)−F(−)|), where F(+)+F(−)=1. Percent e.e. is 100×|F(+)−F(−)|. Enantiomeric composition can be readily characterized by using the gas chromatography method described in Example 6, above, and using methods that are known in the art.

후처리

  1. customTo a 3-necked jacketed 3 L flask equipped with a mechanical stirrer
  2. additionconnected to an automatic titrater by a pH electrode and a feeding tube for addition of base
  3. customwas set to 40° C
  4. additionCelite (16 g) was added to the flask, which
  5. customis bubbled into 5M NaOH (200 mL)
  6. customto remove HCN
  7. waitAfter 1 hour
  8. additiona submerged air bubbler was added to the solution
  9. customthe removal of the HCN
  10. waitAfter 3 hours
  11. temperatureto cool to room temperature
  12. filtrationfiltered through a celite pad
  13. extractionThe filtrate was extracted with butyl acetate (3×800 mL)
  14. filtrationthe combined organic layers filtered through a pad of activated charcoal
  15. customThe solvent was removed under vacuum by rotary evaporation

출처 및 근거

ORD 기록
ord-61fb5e8ed3cd4ea6b8516566051035fc
출처 데이터셋
uspto-grants-2013_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08535910B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트