홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Acrylic Acid → Butyl prop-2-enoate;styrene

HRID 424323
인쇄

반응식

HRID 424323 반응식
[C:1]([O:5][CH2:6][CH2:7][CH2:8][CH3:9])(=[O:4])[CH:2]=[CH2:3].Cl.Cl.N(C(C)(C)C(N)=N)=NC(C)(C)C(N)=N.[CH2:26]=[CH:27][C:28]1[CH:33]=[CH:32][CH:31]=[CH:30][CH:29]=1.C(O)(=O)C=C.C(S)CCCCCCCCCCC>CCCCCCCCCCCCCC[N+](C)(C)C.[Br-].O>[CH2:26]=[CH:27][C:28]1[CH:33]=[CH:32][CH:31]=[CH:30][CH:29]=1.[C:1]([O:5][CH2:6][CH2:7][CH2:8][CH3:9])(=[O:4])[CH:2]=[CH2:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 6581Acrylic AcidHCID 7501StyreneHCID 81951-DodecanethiolHCID 8846Butyl Acrylate2회HCID 763442,2'-Azobis(2-methylpropanimidamide) dihydrochloride

생성물 1

HCID 168422Butyl prop-2-enoate;styrene

시약·촉매·용매 2

HCID 14250
Tetradecyltrimethylammonium bromide
촉매
2회
HCID 962Water용매3회

반응 조건

온도
65 °C

실험 절차

In a round glass flask are charged 300 parts by weight of deionized water and 1.5 parts by weight of TTAB (tetradecyltrimethylammonium bromide, product of Sigma Aldrich) and nitrogen bubbling is performed for 20 minutes. The temperature is raised to 65° C. under stirring. To the reaction mixture is added 40 parts by weight of an n-butyl acrylate monomer, followed by stirring for further 20 minutes. After 0.5 part by weight of a initiator “V-50” (trade name of 2,2′-azobis(2-methylpropionamidine)dihydrochloride, product of Wako Pure Chemicals) is dissolved in 10 parts by weight of deionized water in advance, the resulting solution is charged in the flask. After maintaining the temperature at 65° C. for 3 hours, an emulsion obtained by emulsifying 55 parts by weight of a styrene monomer, 15 parts by weight of an n-butyl acrylate monomer, 2.5 parts by weight of acrylic acid and 0.8 part by weight of dodecanethiol in 100 parts by weight of deionized water having 0.5 part by weight of TTAB dissolved therein is charged in the flask continuously through a metering pump over 2 hours. The temperature is raised to 70° C. and it is maintained for 2 hours, whereby the polymerization is completed. A core-shell resin particle dispersion liquid (A1) having a weight-average molecular weight Mw of 25,000, an average particle size of 150 nm and a solid content of 25 wt. % is obtained.

후처리

  1. stirringby stirring for further 20 minutes
  2. additionthe resulting solution is charged in the flask
  3. temperatureAfter maintaining the temperature at 65° C. for 3 hours
  4. customan emulsion obtained
  5. dissolutiondissolved
  6. additiontherein is charged in the flask continuously through a metering pump over 2 hours
  7. temperatureThe temperature is raised to 70° C.
  8. temperatureit is maintained for 2 hours
  9. customan average particle size of 150 nm and a solid content of 25 wt. % is obtained

출처 및 근거

ORD 기록
ord-65134ed6fb8844fe99f6a2b320ab6e2a
출처 데이터셋
uspto-grants-2012_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08105744B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트